Posts for Tag : custom

Bert’s Custom Tackle American Made Rod Holder Ratchet Satin

Bert-s-Custom-Tackle-American-Made-Rod-Holder-Ratchet-Satin-01-vj
Bert's Custom Tackle American Made Rod Holder Ratchet Satin
Bert's Custom Tackle American Made Rod Holder Ratchet Satin
Bert's Custom Tackle American Made Rod Holder Ratchet Satin
Bert's Custom Tackle American Made Rod Holder Ratchet Satin

Bert's Custom Tackle American Made Rod Holder Ratchet Satin
Bert’s Custom Tackle American Made Rod Holder Ratchet Satin. Proudly made in the USA! 5 Vertical Ratcheting Positions for 90 degrees of motion. Egg base allows the rod holder to rotate 70 degrees horizontally. Suitable for salt or fresh water applications. Compatible with the Bert’s Custom Tackle track system. Available in Buff Brite or Satin finish, the Bert’s Custom Tackle Ratcheting Rodholder offers a 5 vertical position ratcheting gear block that allows one handed hook sets and prevents the rod from “locking” in the tube. The ratchet mechanism increases hookups allowing the angler to set the hook and keep pressure on the fish without having to relieve pressure on the rod to remove from the rod holder. Applicable to fresh or salt water, Bert’s Custom Tackle Rodholders have gimbal pins, stainless steel and anodized aluminum construction, and are salt spray tested to insure years of successful fishing! International customers: please be aware that all of our items, unless otherwise stated, will only run on 120 volts. Please check to make sure your country complies with these specifications. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. We usually respond within 24 hours on weekdays. Thank you for shopping at our store. The item “Bert’s Custom Tackle American Made Rod Holder Ratchet Satin” is in sale since Wednesday, August 14, 2019. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “fastshipdirect” and is located in US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Color: Satin
  • MPN: MF3098SS
  • Model: MF3098SS
  • Brand: Bert’s Custom Tackle

Bert's Custom Tackle American Made Rod Holder Ratchet Satin

Bert S Custom Tackle S Rod Holder

Bert-S-Custom-Tackle-S-Rod-Holder-01-lh

3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW

3-per-side-Aluminum-Jet-Boat-custom-weld-Polished-Fishing-Rod-Holders-NEW-01-hwii
3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW
3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW
3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW
3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW
3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW
3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW
3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW
3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW
3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW
3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW
3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW
3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW

3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW
Polished aluminum and tig welded rod holders a set of 2 with 3 rods per side, could be mounted on your jet boat or fiberglass boat. Rod holders can be custom made for forward facing angle or rearward facing angle on flat bottom base or angle iron base to custom suit your boat Wooldridge custom weld thunderjet alumaweld precision weld harbercraft hewescraft harbercraft north river commander fiberglass boat Welding helmet in the photo is NOT included. The item “3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW” is in sale since Sunday, December 9, 2018. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “oridodrft” and is located in Sumas, Washington. This item can be shipped worldwide.
  • Number of Rods: 6
  • Type: Boat/Outrigger Mounted Holder
  • Material: Aluminium
  • Country/Region of Manufacture: Canada
  • Features: Flush Mount

3 per side Aluminum Jet Boat custom weld Polished Fishing Rod Holders NEW

Custom Aluminum Fishing Rod Holders

Custom-Aluminum-Fishing-Rod-Holders-01-lm
Custom Aluminum Fishing Rod Holders
Custom Aluminum Fishing Rod Holders
Custom Aluminum Fishing Rod Holders
Custom Aluminum Fishing Rod Holders
Custom Aluminum Fishing Rod Holders

Custom Aluminum Fishing Rod Holders
Custom Aluminum Fishing Rod Holders. The item “Custom Aluminum Fishing Rod Holders” is in sale since Thursday, January 9, 2020. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “yes2ui_11″ and is located in Pensacola, Florida. This item can be shipped to United States.
Custom Aluminum Fishing Rod Holders

One Pair of Double Rod Holders -Custom Rod holders-Byerly’s Welding

One-Pair-of-Double-Rod-Holders-Custom-Rod-holders-Byerly-s-Welding-01-psrz
One Pair of Double Rod Holders -Custom Rod holders-Byerly's Welding
One Pair of Double Rod Holders -Custom Rod holders-Byerly's Welding

One Pair of Double Rod Holders -Custom Rod holders-Byerly's Welding
One matching pair of port and starboard custom fabricated heavy duty 6061 aluminum double boat rod riggers. Rod tube is 9″ long, 2″ OD 6061 aluminum, 9 center to center. Rod tube has soft rubber black cap to protect rod. 16″ long x 1 1/2″ OD mounting tube. One rod tube has a 30 degree out left and right and one straight on each side. Each holder has a 30 degree pitch facing out on each side of the boat. These lock down securely into gimbals of the boat rod holders. 40″ lanyard attached to 3/8″ brass snap hook. 1/4 aluminum welded in rod stops in the bottom of the rod tubes. We can add a bend in the mounting tube if you need the rods going off the side of the boat. Just let us know. Solid 100% aluminum TIG welds and super strong material that will last forever. Standard in brushed mill finish with clear coat. The length and degree of the mounting tube can be modified upon request. The item “One Pair of Double Rod Holders -Custom Rod holders-Byerly’s Welding” is in sale since Wednesday, July 31, 2019. This item is in the category “Sporting Goods\Fishing\Other Fishing”. The seller is “gbyerly2″ and is located in Trinity, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Aruba, Dominica, Saint lucia, Turks and caicos islands, Bermuda, Brunei darussalam, Bolivia, Gibraltar, Guadeloupe, Iceland, Jordan, Cayman islands, Sri lanka, Martinique, Maldives, Nicaragua, Oman, Paraguay, Reunion, Uruguay, Russian federation.
  • MPN: Does Not Apply
  • Brand: Unbranded
  • Country of Manufacture: United States

One Pair of Double Rod Holders -Custom Rod holders-Byerly's Welding

Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless

Custom-Rocket-Launchers-Rod-Holders-Set-Of-6-With-Offset-Stainless-01-gnxh
Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless
Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless
Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless
Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless
Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless
Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless
Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless
Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless
Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless
Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless

Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless
Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless. These came off my 21 foot Ken craft center consul they were mounted on a hardtop very nice custom made with offsets high-quality heavy gauge. Comes with marine 12v light with hose clamp cannot confirm if working. Measurements are roughly 59 inches mounting bracket hole 36 7/8 apart across. Look closely at pics. The item “Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless” is in sale since Saturday, December 28, 2019. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “yrkriver” and is located in Williamsburg, Virginia. This item can be shipped to United States.
Custom Rocket Launchers Rod Holders Set Of 6 With Offset Stainless

Bert’s Custom Tackle Swivel Rod Holder Trees for 3 Rods Silver Powder Coat

Bert-s-Custom-Tackle-Swivel-Rod-Holder-Trees-for-3-Rods-Silver-Powder-Coat-01-ngz
Bert's Custom Tackle Swivel Rod Holder Trees for 3 Rods Silver Powder Coat

Bert's Custom Tackle Swivel Rod Holder Trees for 3 Rods Silver Powder Coat
Set of Bert’s Custom Tackle Swivel Rod Holder Tree for 3 Rods Silver Powder Coat. Used 1 year and in great condition. The item “Bert’s Custom Tackle Swivel Rod Holder Trees for 3 Rods Silver Powder Coat” is in sale since Friday, January 10, 2020. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “stockervette” and is located in Cedarville, Ohio. This item can be shipped to United States.
  • Brand: Bert’s Custom Tackle
  • Model: MF3492
  • MPN: MF3492
  • Color: Silver Powder Coat

Bert's Custom Tackle Swivel Rod Holder Trees for 3 Rods Silver Powder Coat

Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used

Berts-Custom-Tackle-Ratcheting-Rod-Holders-lot-of-3-Used-01-vxq
Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used
Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used
Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used
Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used
Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used

Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used
Berts Custom Tackle Ratcheting Rod Holders (lot of 3). Used in fine working condition. 2 have a scratches on the trip lever as seen in the pictures but has no effect on function. These are the older version which do not lock in at 90 degrees but about 85 degrees at the highest position. Otherwise the same as the current production. Each one includes the bungee rod safety retainer. The item “Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used” is in sale since Wednesday, October 30, 2019. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “kks437″ and is located in Saint Clairsville, Ohio. This item can be shipped to United States.
  • Number of Rods: 1 each
  • Brand: Bert’s Custom Tackle
  • Custom Bundle: No
  • Model: Ratcheting Rod Holder
  • Modified Item: No
  • California Prop 65 Warning: WARNING: This product can expose you to chemicals, including lead which is known to the State of California to cause cancer or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • Type: Rod Holder
  • Material: Stainless Steel
  • Finish: Buff Bright Silver
  • MPN: MF 3098
  • Features: Ratcheting

Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used

Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used

Berts-Custom-Tackle-Ratcheting-Rod-Holders-lot-of-3-Used-01-xowy
Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used
Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used
Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used
Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used
Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used

Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used
Berts Custom Tackle Ratcheting Rod Holders (lot of 3). Used in fine working condition. 2 have a scratches on the trip lever as seen in the pictures but has no effect on function. These are the older version which do not lock in at 90 degrees but about 85 degrees at the highest position. Otherwise the same as the current production. Each one includes the bungee rod safety retainer. The item “Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used” is in sale since Wednesday, October 16, 2019. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “kks437″ and is located in Saint Clairsville, Ohio. This item can be shipped to United States.
  • Number of Rods: 1 each
  • Brand: Bert’s Custom Tackle
  • Custom Bundle: No
  • Model: Ratcheting Rod Holder
  • Modified Item: No
  • California Prop 65 Warning: WARNING: This product can expose you to chemicals, including lead which is known to the State of California to cause cancer or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • Type: Rod Holder
  • Material: Stainless Steel
  • Finish: Buff Bright Silver
  • MPN: MF 3098
  • Features: Ratcheting

Berts Custom Tackle Ratcheting Rod Holders (lot of 3) Used

One Pair of Outboard Double Rod Holders -Custom Rod holders-Byerly’s Welding

One-Pair-of-Outboard-Double-Rod-Holders-Custom-Rod-holders-Byerly-s-Welding-01-kxrj
One Pair of Outboard Double Rod Holders -Custom Rod holders-Byerly's Welding
One Pair of Outboard Double Rod Holders -Custom Rod holders-Byerly's Welding
One Pair of Outboard Double Rod Holders -Custom Rod holders-Byerly's Welding
One Pair of Outboard Double Rod Holders -Custom Rod holders-Byerly's Welding

One Pair of Outboard Double Rod Holders -Custom Rod holders-Byerly's Welding
One matching pair of port and starboard custom fabricated heavy duty 6061 aircraft aluminum tandom boat rod rigger. These units are perfect for the kite rod fishermen or for the guys using the wide trolling spread at the stern or kite fishing. Rod holder has a 9” long 6061 aluminum 2” OD. The bottoms of the mounting tubes have been programmed on a CNC milling machine for a perfect fit into the gimbal of the boat rod holders. Equipped with welded on ring for a lanyard and a 40” lanyard with brass snap hasp. Has an 16” long x 1-1/2”OD mounting tube with one rod tube set at 60 degrees out left and right and one straight on each side. Each holder will set 30 degrees in a standard 30 degree boat rod holder facing back on each side of the boat. The rod holder has a brushed aluminum mill finish with a weather resistant clear coating. (can be powder coated for an additional charge). These can also come with the 20 degree bend in the mounting tube facing outboard upon request for the same price. Comes with 1/4” aluminum welded in rod stops in the bottom of the rod tubes. Solid 100% aluminum TIG welds and super strong material that will last forever. The length and degree of the mounting tube can be modified upon request and if you can imagine it we can build it. These lock down secure in the boat gunnel rod holders with two sets of gimbal notches. All of our products are proudly made in NC, USA. Other styles of double rod holders. The item “One Pair of Outboard Double Rod Holders -Custom Rod holders-Byerly’s Welding” is in sale since Monday, July 8, 2019. This item is in the category “Sporting Goods\Fishing\Other Fishing”. The seller is “gbyerly2″ and is located in Trinity, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Aruba, Dominica, Saint lucia, Turks and caicos islands, Bermuda, Brunei darussalam, Bolivia, Ecuador, Gibraltar, Guadeloupe, Iceland, Jordan, Cayman islands, Sri lanka, Martinique, Maldives, Nicaragua, Oman, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Non-Domestic Product: No
  • Country of Manufacture: United States
  • Modified Item: No
  • Custom Bundle: No
  • MPN: Does Not Apply
  • Brand: Unbranded

One Pair of Outboard Double Rod Holders -Custom Rod holders-Byerly's Welding