Posts for Tag : junior

NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA

NEW-Kahuna-JUNIOR-Fishing-Wagon-Walls-No-Rust-10-Tires-Rod-Holders-Made-USA-01-nnx
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA

NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
Introducing the all new. KAHUNA JUNIOR Fishing Wagon!! 36 x 20 solid deck all ALUMINUM pull wagon with heavy duty industrial aluminum welded construction. The solid deck has drain holes in every corner and a 2 perimeter lip to keep your load secure on the deck. Built to withstand the harshest conditions and heavy loads. Interior wagon dimensions are 34 1/2″ x 16.5″. Total overall width including tires is only 24!!! This allows the KAHUNA JUNIOR to glide through all standard entry ways, doors and gates with ease. Same heavy duty strength undercarriages as the BIG KAHUNA. The bottom of the deck stands 12 from the ground. Weighs only 48 lbs. With a 600 lb. The four 10″ x 3.5″ pneumatic four-ply tubed tires slide onto 3/4 solid aluminum axles. These pneumatic tires come with built in grease fittings and glide over the most rough terrains. The pull handle design allows you to maneuver the wagon along narrow pathways and turns on a tight radius. The handle’s curved design eliminates the risk of tripping over the handle while not it use. KAHUNA JUNIOR also comes standard with an aluminum four-rod holder bolted to the aluminum deck with stainless steel hardware. The rod holder can be affixed to either side of the wagon or the rear. Holes have been pre-drilled in the deck so you choose the placement of your rod holder. Rod holders are approximately 9.5″ height, 2″ in diameter and have pins welded into the bottom of each to prevent your rods or umbrellas from falling through. Also includes aluminum wagon walls. Each side of the aluminum walls slide into square tube receivers bolted to the wagon deck with stainless steel hardware. The walls can each be removed independently. Walls stand 8.5 tall from the deck of the wagon. Ideal for hauling coolers, beach gear, fishing & camping equipment, feed & hay, water tanks, sporting equipment, tools & machinery, etc. Made for any beach or fishing fan and strong enough for commercial use. Lightweight, rust-free and corrosion resistant! Stainless steel nuts and bolts. MADE IN THE USA!! The item “NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA” is in sale since Monday, October 19, 2020. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Fishing Carts & Wagons”. The seller is “alumacart” and is located in Hobe Sound, Florida. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • Features: Corrosion Resistant
  • Brand: Alumacart, Inc.

NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA

NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA

NEW-Kahuna-JUNIOR-Beach-Wagon-Walls-No-Rust-Balloon-Tires-Rod-Holders-Made-USA-01-iog
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA

NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
Introducing the all new. 36 x 20 solid deck all ALUMINUM pull wagon with heavy duty industrial aluminum welded construction. The solid deck has drain holes in every corner and a 2 perimeter lip to keep your load secure on the deck. Built to withstand the harshest conditions and heavy loads. Interior wagon dimensions are 34 1/2″ x 16.5″. Total overall width including tires is only 28!!! This allows the KAHUNA JUNIOR to glide through all standard entry ways, doors and gates with ease. The KAHUNA JUNIOR has reinforced and raised undercarriages 2″ taller than our standard pull wagon to accommodate the four 11.8″ x 7 balloon beach tires. The bottom of the deck stands 15.5 from the ground. Weighs only 48 lbs. With a 350 lb. The four 11.8 balloon beach tires glide through the sand with ease. The bearings slide onto 3/4 solid aluminum axles. These low pressure sand tires make hauling your beach or fishing gear through the sand a breeze! The pull handle design allows you to maneuver the wagon along narrow pathways and turns on a tight radius. The handle’s curved design eliminates the risk of tripping over the handle while not it use. KAHUNA JUNIOR also comes standard with an aluminum four-rod holder bolted to the aluminum deck with stainless steel hardware. The rod holder can be affixed to either side of the wagon or the rear. Holes have been pre-drilled in the deck so you choose the placement of your rod holder. Also includes aluminum wagon walls. Each side of the aluminum walls slide into square tube receivers bolted to the wagon deck with stainless steel hardware. The walls can each be removed independently. Walls stand 8.5 tall from the deck of the wagon. Ideal for hauling coolers, beach gear, fishing & camping equipment, feed & hay, water tanks, sporting equipment, tools & machinery, etc. Made for any beach or fishing fan and strong enough for commercial use. Lightweight, rust-free and corrosion resistant! Stainless steel nuts and bolts. MADE IN THE USA!! The item “NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA” is in sale since Monday, October 19, 2020. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Fishing Carts & Wagons”. The seller is “alumacart” and is located in Hobe Sound, Florida. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • Features: Corrosion Resistant
  • Brand: Alumacart, Inc.

NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA

NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA

NEW-Kahuna-JUNIOR-Fishing-Wagon-Walls-No-Rust-10-Tires-Rod-Holders-Made-USA-01-xved
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA

NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA
Introducing the all new. KAHUNA JUNIOR Fishing Wagon!! 36 x 20 solid deck all ALUMINUM pull wagon with heavy duty industrial aluminum welded construction. The solid deck has drain holes in every corner and a 2 perimeter lip to keep your load secure on the deck. Built to withstand the harshest conditions and heavy loads. Interior wagon dimensions are 34 1/2″ x 16.5″. Total overall width including tires is only 24!!! This allows the KAHUNA JUNIOR to glide through all standard entry ways, doors and gates with ease. Same heavy duty strength undercarriages as the BIG KAHUNA. The bottom of the deck stands 12 from the ground. Weighs only 48 lbs. With a 600 lb. The four 10″ x 3.5″ pneumatic four-ply tubed tires slide onto 3/4 solid aluminum axles. These pneumatic tires come with built in grease fittings and glide over the most rough terrains. The pull handle design allows you to maneuver the wagon along narrow pathways and turns on a tight radius. The handle’s curved design eliminates the risk of tripping over the handle while not it use. KAHUNA JUNIOR also comes standard with an aluminum four-rod holder bolted to the aluminum deck with stainless steel hardware. The rod holder can be affixed to either side of the wagon or the rear. Holes have been pre-drilled in the deck so you choose the placement of your rod holder. Rod holders are approximately 9.5″ height, 2″ in diameter and have pins welded into the bottom of each to prevent your rods or umbrellas from falling through. Also includes aluminum wagon walls. Each side of the aluminum walls slide into square tube receivers bolted to the wagon deck with stainless steel hardware. The walls can each be removed independently. Walls stand 8.5 tall from the deck of the wagon. Ideal for hauling coolers, beach gear, fishing & camping equipment, feed & hay, water tanks, sporting equipment, tools & machinery, etc. Made for any beach or fishing fan and strong enough for commercial use. Lightweight, rust-free and corrosion resistant! Stainless steel nuts and bolts. MADE IN THE USA!! The item “NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA” is in sale since Tuesday, December 17, 2019. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Fishing Carts & Wagons”. The seller is “alumacart” and is located in Hobe Sound, Florida. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • Features: Corrosion Resistant
  • Brand: Alumacart, Inc.

NEW Kahuna JUNIOR Fishing Wagon-Walls-No Rust-10 Tires-Rod Holders-Made USA

NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA

NEW-Kahuna-JUNIOR-Beach-Wagon-Walls-No-Rust-Balloon-Tires-Rod-Holders-Made-USA-01-jwbb
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA

NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA
Introducing the all new. 36 x 20 solid deck all ALUMINUM pull wagon with heavy duty industrial aluminum welded construction. The solid deck has drain holes in every corner and a 2 perimeter lip to keep your load secure on the deck. Built to withstand the harshest conditions and heavy loads. Interior wagon dimensions are 34 1/2″ x 16.5″. Total overall width including tires is only 28!!! This allows the KAHUNA JUNIOR to glide through all standard entry ways, doors and gates with ease. The KAHUNA JUNIOR has reinforced and raised undercarriages 2″ taller than our standard pull wagon to accommodate the four 11.8″ x 7 balloon beach tires. The bottom of the deck stands 15.5 from the ground. Weighs only 48 lbs. With a 350 lb. The four 11.8 balloon beach tires glide through the sand with ease. The bearings slide onto 3/4 solid aluminum axles. These low pressure sand tires make hauling your beach or fishing gear through the sand a breeze! The pull handle design allows you to maneuver the wagon along narrow pathways and turns on a tight radius. The handle’s curved design eliminates the risk of tripping over the handle while not it use. KAHUNA JUNIOR also comes standard with an aluminum four-rod holder bolted to the aluminum deck with stainless steel hardware. The rod holder can be affixed to either side of the wagon or the rear. Holes have been pre-drilled in the deck so you choose the placement of your rod holder. Also includes aluminum wagon walls. Each side of the aluminum walls slide into square tube receivers bolted to the wagon deck with stainless steel hardware. The walls can each be removed independently. Walls stand 8.5 tall from the deck of the wagon. Ideal for hauling coolers, beach gear, fishing & camping equipment, feed & hay, water tanks, sporting equipment, tools & machinery, etc. Made for any beach or fishing fan and strong enough for commercial use. Lightweight, rust-free and corrosion resistant! Stainless steel nuts and bolts. MADE IN THE USA!! The item “NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA” is in sale since Wednesday, November 13, 2019. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Fishing Carts & Wagons”. The seller is “alumacart” and is located in Hobe Sound, Florida. This item can be shipped to United States.
  • Country/Region of Manufacture: United States
  • Features: Corrosion Resistant
  • Brand: Alumacart, Inc.

NEW Kahuna JUNIOR Beach Wagon-Walls-No Rust-Balloon Tires-Rod Holders-Made USA