Posts for Tag : medium

Lee’s 30 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder Medium 2 inch O. D

Lee-s-30-Degree-Stainless-Steel-Heavy-Duty-Bar-Pin-Rod-Holder-Medium-2-inch-O-D-01-vky
Lee's 30 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder Medium 2 inch O. D
Lee's 30 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder Medium 2 inch O. D
Lee's 30 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder Medium 2 inch O. D
Lee's 30 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder Medium 2 inch O. D

Lee's 30 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder Medium 2 inch O. D
Flush Mount Rod Holder. Heavy Duty Bar Pin.
Lee's 30 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder Medium 2 inch O. D

INC. Lee’s 15176 Stainless Steel Swivel Base Flush Mount Rod Holder Medium

INC-Lee-s-15176-Stainless-Steel-Swivel-Base-Flush-Mount-Rod-Holder-Medium-01-tly
INC. Lee's 15176 Stainless Steel Swivel Base Flush Mount Rod Holder Medium

INC. Lee's 15176 Stainless Steel Swivel Base Flush Mount Rod Holder Medium
Swivel Base Rod HoldersRH5169Half Angle 15° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2″ OD x 6-1/2″ long tube. Without a doubt our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool especially important in Giant Blue Fin Tuna fishing where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but more importantly it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a ½ inch stainless steel lock nut at the bottom of the rod holder.
INC. Lee's 15176 Stainless Steel Swivel Base Flush Mount Rod Holder Medium

Lee’s Tackle Lee’s 30 Degree SS Flush Mount Rod Holder Medium 2 OD

Lee-s-Tackle-Lee-s-30-Degree-SS-Flush-Mount-Rod-Holder-Medium-2-OD-01-kbz
Lee's Tackle Lee's 30 Degree SS Flush Mount Rod Holder Medium 2 OD
Lee's Tackle Lee's 30 Degree SS Flush Mount Rod Holder Medium 2 OD

Lee's Tackle Lee's 30 Degree SS Flush Mount Rod Holder Medium 2 OD
Flush Mount Rod Holder RH-525SS Medium 30° Stainless Steel The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years.
Lee's Tackle Lee's 30 Degree SS Flush Mount Rod Holder Medium 2 OD

Lee’s 0 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder 2 inch OD Medium

Lee-s-0-Degree-Stainless-Steel-Heavy-Duty-Bar-Pin-Rod-Holder-2-inch-OD-Medium-01-tfid
Lee's 0 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder 2 inch OD Medium
Lee's 0 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder 2 inch OD Medium
Lee's 0 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder 2 inch OD Medium
Lee's 0 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder 2 inch OD Medium

Lee's 0 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder 2 inch OD Medium
Lee’s 0 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder – 2 inch OD Medium. Img{max-width:100%; height:auto;} Lee’s 0 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder – 2 O. Lee’s 0 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder – 2 O. Flush Mount Rod Holder Heavy Duty Bar Pin All Stainless Steel RH-527VS/XS Medium 0° The choice of boat manufacturers and consumers alike, Lee’s has been the Rod Holder Specialist for over 50 years. Diameter (Inches): 2.0. Length (Inches): 8.5. Box Dimensions: 5″H x 6″W x 14L WT: 1.9 lbs. Track Page Views With. Auctiva’s FREE Counter.
Lee's 0 Degree Stainless Steel Heavy Duty Bar Pin Rod Holder 2 inch OD Medium

Lee’s 0 Degree SS Flush Mount Swivel Base Rod Holder 2 x 9 Medium RH536

Lee-s-0-Degree-SS-Flush-Mount-Swivel-Base-Rod-Holder-2-x-9-Medium-RH536-01-eh
Lee's 0 Degree SS Flush Mount Swivel Base Rod Holder 2 x 9 Medium RH536

Lee's 0 Degree SS Flush Mount Swivel Base Rod Holder 2 x 9 Medium RH536
Computers, Tablets & Networking. Cell Phones & Accessories. Lee’s 0 Degree SS Flush Mount Swivel Base Rod Holder – 2″ x 9″ – Medium. Authorized Dealer for most of our brands. Brief Description: LEE’S 0 DEGREE SS FLUSH MOUNT SWIVEL BASE ROD HOLDER 2″X9″. If video is not playing, means there is no video available. Swivel Base Flush Mount Rod Holder Part #: RH-5367SS Medium 0 Degree Stainless Steel Without a doubt, our swivel base rod holder is the “Ultimate Rod Holder” for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip’s roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. We answer within 0-8 hours. You can reach our team by clicking on the Ask a question. Link at the bottom of the page. We can send most of our products worldwide. Please track your package to avoid the return to us. In case it will, we’ll credit you less our S&H costs. If you require a specific carrier, please note it when you checkout at the end of your order. We will do our best to keep our customers happy. Please remember We’re Always On Your Side. We’re working very hard to maintain our business reputation and we enjoy providing a world-class service. Verify your address is correct & in English. Follow the tracking once available. Leave us a 5 star feedback. LEARN OF NEW OFFERS.
Lee's 0 Degree SS Flush Mount Swivel Base Rod Holder 2 x 9 Medium RH536

Lee’s 30° Stainless Steel Swivel Base Flush Mount Rod Holder Medium

Lee-s-30-Stainless-Steel-Swivel-Base-Flush-Mount-Rod-Holder-Medium-01-jdii
Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder Medium

Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder Medium
Lee’s 30° Stainless Steel Swivel Base Flush Mount Rod Holder – Medium – 2″ OD X 6.5″ Tube f/Small Bent Butts. RH5165Standard Angle 30° Short TubeMedium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2″ OD x 6-1/2″ long tube. Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with 1/2 inch stainless steel lock nut at the bottom of the rod holder. Kindly avoid putting any tape on the retail box as it will damage the item. Your feedback is very important to us. We guarantee that your issue will be solved quickly. We sell name brand products for less. Please let us know if there is anything we can assist you with.
Lee's 30° Stainless Steel Swivel Base Flush Mount Rod Holder Medium

Lee’s 0° Stainless Steel Swivel Base Flush Mount Rod Holder Medium 2 O

Lee-s-0-Stainless-Steel-Swivel-Base-Flush-Mount-Rod-Holder-Medium-2-O-01-uxrv
Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder Medium 2 O

Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder Medium 2 O
RH5167V Vertical 0° Short Tube Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2″ OD x 6-1/2″ long tube. Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder.
Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder Medium 2 O

Lee’s 0° Stainless Steel Swivel Base Flush Mount Rod Holder Medium 2 O

Lee-s-0-Stainless-Steel-Swivel-Base-Flush-Mount-Rod-Holder-Medium-2-O-01-duk
Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder Medium 2 O

Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder Medium 2 O
RH5167V Vertical 0° Short Tube Medium size Short Swivel Base for Stand-Up Rods with Curved Butts. Has 2″ OD x 6-1/2″ long tube. Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “the-shot-shop” and is located in this country: US. This item can be shipped to United States.
  • Model: RH5167V
  • UPC: 96811516526
  • EAN: 0066510892696
  • Brand: Lee’s Tackle
  • Type: Rod Holder
  • Number of Rods: 1
  • Color: Silver
  • MPN: RH5167V
  • Features: Flush Mount
  • Item Length: 5.5 in

Lee's 0° Stainless Steel Swivel Base Flush Mount Rod Holder Medium 2 O

Rod Storage Holder 6 Medium Flush mount unit. New High Seas Gear Aluminum holder

Rod-Storage-Holder-6-Medium-Flush-mount-unit-New-High-Seas-Gear-Aluminum-holder-01-oq
Rod Storage Holder 6 Medium Flush mount unit. New High Seas Gear Aluminum holder

Rod Storage Holder 6 Medium Flush mount unit. New High Seas Gear Aluminum holder
Welcome to High Seas Gear Products! Receive discounted prices on all products when you shop on our website! Rods in photos are not included. If you are a returning customer and are looking for our new products we would like to take a moment and thank you for your business and support. If you are new to High Seas Gear then we would like to welcome you and encourage you to give our products a try. You will not be disappointed! We are a Minnesota based company and take pride in the price and quality of all the products we produce. Our product line keeps growing to meet customers wants and needs. So Thank You and Happy Fishing! Rod Storage Holder 6 MEDIUM Unit. Each holds 1-6 rods. Cutouts allow reels to lock into place. 1 3/4″ outside diameter with 1/8″ wall tubing. Made of 6061-T6 Aluminum tubing. Unit is 30″ wide x 5″ tall. Great for boat or fish houses. High seas gear offers a full line of quality products. All of our rod storage holders are powder coated for maximum performance. Alesta Powder Coatings Color Name: Silvadillo Type: TGIC-Polyester. ASTM D523-89 Gloss at 60 degrees. DPC TM 10.219 PCI Powder Smoothness. ASTM D2454-95 Overbake Resistance, Time 100%. ASTM D3363-92a Pencil Hardness. ASTM D2794-93 Dir/Rev Impact, Gardner 100 / 100 in/lbs. ASTM D3359-97 Adhesion, Cross Hatch. ASTM D522-93a Flexibility, Mandrel. ASTM B117-97 Salt Spray. Application – Electrostatic Spray – Cold Substrate: 0.032 in. CRS Pretreatment: Bonderite 1000, Parcolene 60 Film Thickness 2.0-3.0 Mils. Check out my other items. Be sure to add me to your favorites list. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “anttila5242″ and is located in this country: US. This item can be shipped to United States, Canada.
  • Brand: High Seas Gear
  • Type: Boat Mounted Holder
  • Number of Rods: 6
  • Model: RS6MED
  • Features: Flush Mount
  • Material: Aluminum
  • Country/Region of Manufacture: United States
  • UPC: 694263120539

Rod Storage Holder 6 Medium Flush mount unit. New High Seas Gear Aluminum holder

Lee’s 30 Degree SS Flush Mount Swivel Base Rod Holder 2 x 9 Medium

Lee-s-30-Degree-SS-Flush-Mount-Swivel-Base-Rod-Holder-2-x-9-Medium-01-nx
Lee's 30 Degree SS Flush Mount Swivel Base Rod Holder 2 x 9 Medium

Lee's 30 Degree SS Flush Mount Swivel Base Rod Holder 2 x 9 Medium
Lee’s 30 Degree SS Flush Mount Swivel Base Rod Holder – 2″ x 9″ – Medium. Swivel Base Flush Mount Rod HolderPart #: RH-5365SS Medium 30 Stainless SteelWithout a doubt, our swivel base rod holder is the “Ultimate Rod Holder” for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tip’s roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a half inch stainless steel lock nut at the bottom of the rod holder. Kindly avoid putting any tape on the retail box as it will damage the item. Your feedback is very important to us. We guarantee that your issue will be solved quickly. We sell name brand products for less. Please let us know if there is anything we can assist you with. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “sunriseworldwidellc” and is located in this country: US. This item can be shipped to United States, New Zealand, Fiji, Papua New Guinea, Wallis and Futuna, Malaysia, Taiwan, Poland, Oman, Suriname, United Arab Emirates, Argentina, Armenia, Uzbekistan, Bhutan, Ireland, Qatar, Netherlands, Iraq, Slovakia, Slovenia, Thailand, Aruba, Sweden, Iceland, Macedonia, Belgium, Israel, Kuwait, Liechtenstein, Antigua and Barbuda, Italy, Pakistan, Panama, Singapore, Kyrgyzstan, Switzerland, Chile, China, Republic of Croatia, Cambodia, Indonesia, Portugal, Malta, Tajikistan, Vietnam, Cayman Islands, Paraguay, Cyprus, Bangladesh, Australia, Austria, Sri Lanka, Bulgaria, Czech Republic, Norway, Kiribati, Turkmenistan, Grenada, Greece, Haiti, Greenland, Yemen, Afghanistan, Montenegro, Mongolia, Nepal, Bahamas, Bahrain, United Kingdom, Bosnia and Herzegovina, Hungary, Western Samoa, France, Peru, Denmark, Guatemala, Solomon Islands, Vatican City State, Nauru, Anguilla, El Salvador, Dominican Republic, Guyana, Azerbaijan Republic, Macau, Georgia, Tonga, San Marino, Saint Kitts-Nevis, Saint Vincent and the Grenadines, Belize, Philippines, Colombia, Spain, Estonia, Bermuda, Montserrat, South Korea, Vanuatu, Ecuador, Albania, Monaco, Laos, Moldova, Saint Pierre and Miquelon, Lebanon, Bolivia, Maldives, Gibraltar, Hong Kong, Saint Lucia, Jordan, Canada, Turks and Caicos Islands, Andorra, Romania, Costa Rica, India, Mexico, Serbia, Kazakhstan, Saudi Arabia, Japan, Lithuania, Trinidad and Tobago, Nicaragua, Finland, Luxembourg, Brazil, Turkey, Germany, Latvia, Jamaica, Brunei Darussalam, Honduras.
  • SKU: CWD-42040
  • Color: Blue
  • Country of Manufacture: United States
  • Material: Steel
  • Brand: Lee’s Tackle
  • MPN: RH5365
  • Model Number: 42040
  • Length: 15
  • Width: 6
  • Height: 5
  • UPC: 096811530713

Lee's 30 Degree SS Flush Mount Swivel Base Rod Holder 2 x 9 Medium