Posts for Tag : pieces

Carmate If6 Dual Hold Type Fishing Rod Holder Inno 5 Pieces 4973007448068

Carmate-If6-Dual-Hold-Type-Fishing-Rod-Holder-Inno-5-Pieces-4973007448068-01-hr
Carmate If6 Dual Hold Type Fishing Rod Holder Inno 5 Pieces 4973007448068
Carmate If6 Dual Hold Type Fishing Rod Holder Inno 5 Pieces 4973007448068
Carmate If6 Dual Hold Type Fishing Rod Holder Inno 5 Pieces 4973007448068

Carmate If6 Dual Hold Type Fishing Rod Holder Inno 5 Pieces 4973007448068
CARMATE IF6 DUAL HOLD TYPE FISHING ROD HOLDER INNO 5 PIECES 4973007448068. Dual hold type IF6 which surely holds 1 piece and 2 pieces, bass/trout also sea bass/off. Shore/fly rod can be loaded. Compatible to grip diameter 34mm, tip side 16mm. The detachable & extensible holder is a. New mechanism detachable both front and rear with the main body mounted on the car. Type: Fishing rod holder. Packing dimensions: 122 x 13 x 8cm. Packing weight: 4.71kg. Assist pipe x 2. Horizontal bar x 2. Frame bar x 2. Frame pipe x 2. Cross holder x 4. Holder mounting knob x 4. Spacer(1) x 4. Spacer(2 – 3) set x 1. Front holder x 1. Rear holder x 1. Frame Mall x 1. Number of loading: 5 pieces. Maximum loading weight of frame part: 7.0kg. TOYOTA Noah Voxyy 80 R8 series. HONDA Wesel RU1 4 series. MAZDA CX-5 KF KF#P system. SUBARU XV GT series. Fishing rods and reels reflected in the picture are not included. JP POST (AIR, SAL). Asia Middle East America/ Central America Oceania. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “rejapanrknight” and is located in this country: JP. This item can be shipped worldwide.
  • Type: fishing rod holder
  • MPN: IF6
  • Brand: Carmate
  • Place: in the car
  • Series: inno
  • UPC: 4973007448068

Carmate If6 Dual Hold Type Fishing Rod Holder Inno 5 Pieces 4973007448068

Marine Boat 4 Pieces Ss 304 Fishing Rod Holder 9.5 Flush Mount 30° Pvc Cap

Marine-Boat-4-Pieces-Ss-304-Fishing-Rod-Holder-9-5-Flush-Mount-30-Pvc-Cap-01-bv
Marine Boat 4 Pieces Ss 304 Fishing Rod Holder 9.5 Flush Mount 30° Pvc Cap

Marine Boat 4 Pieces Ss 304 Fishing Rod Holder 9.5 Flush Mount 30° Pvc Cap
Pactrade Marine X4 SS304 Fishing Rod Holder 9.5” Flush Mount 45 Degree PVC Cap. This is a high quality Stainless Steel 304 Fishing Rod Holder with Neoprene gasket insert With PVC cap. It is at 45 degree angle. Dimensions: 9.5″L By 1 7/8″ (241 mm BY 47.6mm). This is a set of 4 Stainless Steel Fishing Rod Holders with PVC Cap. Pactrade Marine is a US based distributor of marine and RV lighting and accessories. We strive to provide our customers with the best products and customer service. Customers please note every computer shows colors differently. All measurements are approximate. 48 continental states only. International Buyers – Please Note. We offer discounted international rates for our customers. We ask that customers seek out these details before purchasing. Ask for your discounted combined invoice before making any payments. We do not give discounts if you pay separately or already paid before we sent you a combined invoice. When items are too large to be packed together-packing them together may cause damages to the products. When items are fragile-packing them with other products may cause unwanted damages. When items are very heavy-This may also cause damages. We will notify you if this phenomenon occurs. Again, these are rare cases. The safety of your products is of prime importance to us. Any item with no original box. Any item that has been used unless damaged or defective. We will only give credit for merchandise received based on original claim made. Please inspect all merchandise carefully for any damages or defects upon receipt of item. Any damages or defective products should be reported within 7 days upon receipt of order. Failure to do so within the time specified may result in forfeiture of credit for damaged/defective items. –It is at 45 degree angle. –Dimensions: 9.5″L By 1 7/8″ (241 mm BY 47.6mm) —This is a set of 4 Stainless Steel Fishing Rod Holders with PVC Cap. –Item: P54075x4 — — Pactrade Marine is a US based distributor of marine and RV lighting and accessories. The item “MARINE BOAT 4 PIECES SS 304 FISHING ROD HOLDER 9.5 FLUSH MOUNT 30° PVC CAP” is in sale since Thursday, August 17, 2017. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Other”. The seller is “closeout_marine” and is located in Edmond, Oklahoma. This item can be shipped worldwide.
  • Manufacturer Part Number: P54075X4
  • Brand: Pactrade Marine

Marine Boat 4 Pieces Ss 304 Fishing Rod Holder 9.5 Flush Mount 30° Pvc Cap

Carmate If7 Dual Fishing Rod Holder Inno 8 Pieces 4973007448075

Carmate-If7-Dual-Fishing-Rod-Holder-Inno-8-Pieces-4973007448075-01-essa
Carmate If7 Dual Fishing Rod Holder Inno 8 Pieces 4973007448075
Carmate If7 Dual Fishing Rod Holder Inno 8 Pieces 4973007448075
Carmate If7 Dual Fishing Rod Holder Inno 8 Pieces 4973007448075
Carmate If7 Dual Fishing Rod Holder Inno 8 Pieces 4973007448075

Carmate If7 Dual Fishing Rod Holder Inno 8 Pieces 4973007448075
CARMATE IF7 DUAL FISHING ROD HOLDER INNO 8 PIECES 4973007448075. Dual hold type IF7 which surely holds 1 piece and 2 pieces, bass/trout also sea bass/off. Shore/fly rod can be loaded. Compatible to grip diameter 34mm, tip side 16mm. The detachable & extensible holder is a. New mechanism detachable both front and rear with the main body mounted on the car. Type: Fishing rod holder. Packing dimensions: 122 x 14 x 8cm. Packing weight: 4.98kg. Assist pipe x 2. Horizontal bar x 2. Frame bar x 2. Frame pipe x 2. Cross holder x 4. Holder mounting knob x 4. Countersunk screws x 4. Spacer(1) x 4. Spacer(2 – 3) set x 1. Front holder x 1. Rear holder x 1. Frame Mall x 1. Number of loading: 8 pieces. Maximum loading weight of frame part: 7.0kg. Size: H200 x W1450 x D1250mm. Fishing rods and reels reflected in the picture are not included. JP POST (AIR, SAL). Asia Middle East America/ Central America Oceania. The item “CARMATE IF7 DUAL FISHING ROD HOLDER INNO 8 PIECES 4973007448075″ is in sale since Sunday, September 30, 2018. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “rejapanrknight” and is located in Ibaraki. This item can be shipped worldwide.
  • Type: Fishing rod holder
  • MPN: IF7
  • Brand: Carmate
  • Place: in the car
  • Series: inno

Carmate If7 Dual Fishing Rod Holder Inno 8 Pieces 4973007448075

4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Marine Boat

4-Pieces-Stainless-Steel-304-Fishing-Rod-Holder-9-5-Flush-Mount-30-Marine-Boat-01-qu
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Marine Boat
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Marine Boat
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Marine Boat
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Marine Boat
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Marine Boat
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Marine Boat
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Marine Boat
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Marine Boat
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Marine Boat

4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Marine Boat
4 PIECES STAINLESS STEEL 304 FISHING ROD HOLDER 9.5 FLUSH MOUNT 30&#######xB0; MARINE BOAT. 4 PIECES STAINLESS STEEL 304 FISHING ROD HOLDER 9.5 FLUSH MOUNT 30&#######xC2;&#######xB0; MARINE BOATBOTEGA DISTRIBUTING’S CODE OF EXCELLENCE. We promise you prompt communication. We promise you excellent after sale customer service. This is a high quality Stainless Steel 304 Fishing Rod Holder with Neoprene gasket & insert. It is at 30 degree angle. Dimensions: 9.5″L&#######xA0;&#######xA0; By&#######xA0; 1 7/8″&#######xA0; (241.3 mm BY 47.6mm). This is a set of 4 Stainless Steel Fishing Rod Holders. Item: P54071 X 4. Any product development defect in material or workmanship within this period will be repaired or replaced. Product warranted is damaged by accident or unreasonable use, neglect, improper service – All special order, non-stock, one of a kind items. Product has exceeded the rated capacity specified on the fixture such as the use of a 20W bulb in a 10W rated fixture. Product is used where it is not intended for such as the use of an interior fixture in an exterior application. Improperly installed products – Unpaid items such as, but not limited to, samples. 48 continental states only. We offer discounted international rates for our customers. We ask that customers seek out these details before purchasing. Refer to our feedback for our customers&#######xE2;&#####x20AC;&#####x2122; opinions about our business. Our ultimate goal is to get the items you bought delivered to your home as safely and quickly as economically possible. Ask for your discounted combined invoice before making any payments. We do not give discounts if you pay separately or already paid before we sent you a combined invoice. When items are too large to be packed together-packing them together may cause damages to the products. When items are fragile-packing them with other products may cause unwanted damages. When items are very heavy-This may also cause damages. We will notify you if this phenomenon occurs. Again, these are rare cases. Terms & Conditions&#######xA0;All Items are new unless otherwise stated. Please read the entire listing on Items. We are more than happy to answer any questions you may have. International Buyers – Please Note. The safety of your products is of prime importance to us. Any item with no original box. Any item that has been used unless damaged or defective. We will only give credit for merchandise received based on original claim made. Please inspect all merchandise carefully for any damages or defects upon receipt of item. Any damages or defective products should be reported within 7&#######xA0;days upon receipt of order. Failure to do so within the time specified may result in forfeiture of credit for damaged/defective items. It is at 30 degree angle; Dimensions: 9.5″L By 1 7/8″ (241.3 mm BY 47.6mm) This is a set of 4 Stainless Steel Fishing Rod Holders. Refer to our feedback for our customersâ?? Opinions about our business. 2–When items are fragile-packing them with other products may cause unwanted damages. 3–When items are very heavy-This may also cause damages. Terms & Conditions All Items are new unless otherwise stated. The item “4 PIECES STAINLESS STEEL 304 FISHING ROD HOLDER 9.5 FLUSH MOUNT 30° MARINE BOAT” is in sale since Monday, January 16, 2017. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Other”. The seller is “closeout_marine” and is located in Edmond, Oklahoma. This item can be shipped worldwide.
  • Manufacturer Part Number: P54071 X 4
  • Brand: Pactrade Marine
  • UPC: 726549808562

4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Marine Boat

4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Degree

4-Pieces-Stainless-Steel-304-Fishing-Rod-Holder-9-5-Flush-Mount-30-Degree-01-rhm
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Degree
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Degree
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Degree
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Degree
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Degree
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Degree
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Degree
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Degree
4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Degree

4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Degree
4 PIECES STAINLESS STEEL 304 FISHING ROD HOLDER 9.5 FLUSH MOUNT 45&#######xB0; MARINE BOAT. This is a high quality Stainless Steel 304 Fishing Rod Holder with Neoprene gasket & insert. It is at 45 degree angle. Dimensions: 9.5″L&#######xA0;&#######xA0; By&#######xA0; 1 7/8″&#######xA0; (241.3 mm BY 47.6mm). This is a set of 4 Stainless Steel Fishing Rod Holders. Item: P54071 X 4. 48 continental states only. International Buyers – Please Note. We offer discounted international rates for our customers. We ask that customers seek out these details before purchasing. Ask for your discounted combined invoice before making any payments. We do not give discounts if you pay separately or already paid before we sent you a combined invoice. When items are too large to be packed together-packing them together may cause damages to the products. When items are fragile-packing them with other products may cause unwanted damages. When items are very heavy-This may also cause damages. We will notify you if this phenomenon occurs. Again, these are rare cases. The safety of your products is of prime importance to us. Any item with no original box. Any item that has been used unless damaged or defective. We will only give credit for merchandise received based on original claim made. Please inspect all merchandise carefully for any damages or defects upon receipt of item. Any damages or defective products should be reported within 7&#######xA0;days upon receipt of order. Failure to do so within the time specified may result in forfeiture of credit for damaged/defective items. It is at 45 degree angle; Dimensions: 9.5″L By 1 7/8″ (241.3 mm BY 47.6mm) This is a set of 4 Stainless Steel Fishing Rod Holders. The item “4 PIECES STAINLESS STEEL 304 FISHING ROD HOLDER 9.5 FLUSH MOUNT 30° DEGREE” is in sale since Wednesday, January 4, 2017. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Other”. The seller is “closeout_marine” and is located in Edmond, Oklahoma. This item can be shipped worldwide.
  • Manufacturer Part Number: P54071 X 4
  • Brand: Pactrade Marine
  • UPC: 726549808562

4 Pieces Stainless Steel 304 Fishing Rod Holder 9.5 Flush Mount 30° Degree

4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter

4-Pieces-Drop-in-Swivel-Rod-Holder-Fishing-Pole-Converter-01-ub
4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter
4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter
4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter
4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter
4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter
4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter
4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter
4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter
4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter
4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter

4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter
4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter. This listing includes the following items. 1 pcs Drop-in Swivel Rod Holder Fishing Pole Converter. 21.31 x 4. 11.73 x 4. Drop-in Swivel instantly converts any in-gunnel rod holder to a swivel rod holder. Fits inside any rod holder with 38.1mm Outer diameter. Investment cast 316 stainless construction. Smooth turning adjustable swivel resistance. Material: 316 stainless steel, outer Diameter:Approx. 38.1mm/1.5inch, height:Approx. 4 Pieces Drop-in Swivel Rod Holder. Color might be slightly different due to the color calibration of each individual monitor. Please allow slightly measuring deviation due to manual measurement. Please verify your address during checkout. We are not responsible for any wrong or undeliverable addresses. People always bought together with. The item “4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter” is in sale since Monday, June 10, 2019. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “dealsgoing” and is located in Shenzhen. This item can be shipped worldwide.
  • Brand: Unbranded
  • MPN: Does Not Apply
  • Material: 316 Stainless Steel
  • Country/Region of Manufacture: China
  • Size: as described
  • Color: Silver
  • Designer/Brand: Unbranded

4 Pieces Drop-in Swivel Rod Holder Fishing Pole Converter

Outrigger Trolling Rod Holder x 2 Pieces Stainless Steel Fishing Rod Holder NEW

Outrigger Trolling Rod Holder x 2 Pieces Stainless Steel Fishing Rod Holder NEW
Outrigger Trolling Rod Holder x 2 Pieces Stainless Steel Fishing Rod Holder NEW
Outrigger Trolling Rod Holder x 2 Pieces Stainless Steel Fishing Rod Holder NEW
Outrigger Trolling Rod Holder x 2 Pieces Stainless Steel Fishing Rod Holder NEW

Outrigger Trolling Rod Holder x 2 Pieces Stainless Steel Fishing Rod Holder NEW
Join our mailing list. LED Lights 12 Volt. Outrigger Trolling Rod Holder x 2 Pieces Stainless Steel Fishing Rod Holder NEW. Outrigger Rod Holders x 2 Pieces. Ideal For Mackeral Trolling. Keeps rods outboard and lines further apart. Slots into existing flush mount rod holders on your gunwale. This rod holder allows optimal positioning of rod for trolling. 4 slots in base for locating into existing rod holder. Includes rod safety lanyard 600mm x 20mm with brass snap hook. Supporting tube length 392mm. Overall Length 495mm x 38mm internal diamter. Grab Your Tackle delivers our products Australia wide using Australia Post and Fastways Couriers. This is to be used by the purchaser to track and trace their item during transit time. All goods must be in original condition, original packaging and fit for resale. We are here to help our customers, we try hard to send the correct items in a timely manner, you will be delighted with our service and response if anything does go wrong. The item “Outrigger Trolling Rod Holder x 2 Pieces Stainless Steel Fishing Rod Holder NEW” is in sale since Sunday, March 1, 2015. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Downrigger, Outrigger Gear”. The seller is “grab-your-tackle” and is located in Mount Cotton Brisbane. This item can be shipped worldwide.
  • Brand: SAW
  • Type: Outrigger
  • MPN: 49918

Outrigger Trolling Rod Holder x 2 Pieces Stainless Steel Fishing Rod Holder NEW