https://fishingcaneholder.com Sun, 03 May 2026 16:19:42 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fishingcaneholder.com/2024/11/daiichi-seiko-fishing-rod-pole-holder-01022-mini-lark-from-japan-new/ https://fishingcaneholder.com/2024/11/daiichi-seiko-fishing-rod-pole-holder-01022-mini-lark-from-japan-new/#comments Wed, 27 Nov 2024 00:35:58 +0000 https://fishingcaneholder.com/2024/11/daiichi-seiko-fishing-rod-pole-holder-01022-mini-lark-from-japan-new/








Welcome to our store. Daiichi Seiko Fishing Rod Pole holder 01022 Mini Lark from Japan NEW. All the items we carry are genuine distributed in Japan. Mounting effective width 10 to 90mm? Weight 0.7kg? Mini support standard equipment (support pole diameter 25mm)? Compatible Harris: up to about 8? Dedicated case / with bag. If “Made in Japan” is NOT described on whole listing page, Items are manufactured in other country China, Vietnam and etc. [Manual & Menu Language]. The manuals & menus with the products are in Japanese language. The products we carry are distributed in Japan. Japanese Menu Only : Panasonic Camera English Menu available : Nikon, Canon. Voltage:100V, Plug :Type A, FM Tune:70-90MHz. Please check your country’s condition for use. [International Buyers – Please Note]. We declare items value correctly, no undervalue, no mark as a gift. Our operation follows the Japanese calendar and Japanese time.

]]> https://fishingcaneholder.com/2024/11/daiichi-seiko-fishing-rod-pole-holder-01022-mini-lark-from-japan-new/feed/ 0 https://fishingcaneholder.com/2024/10/daiwa-429757-fishing-rod-holder-power-holder-sokko-boat-from-japan-new/ https://fishingcaneholder.com/2024/10/daiwa-429757-fishing-rod-holder-power-holder-sokko-boat-from-japan-new/#comments Sun, 27 Oct 2024 22:16:37 +0000 https://fishingcaneholder.com/2024/10/daiwa-429757-fishing-rod-holder-power-holder-sokko-boat-from-japan-new/





Daiwa 429757 Fishing Rod Holder Power Holder Sokko Boat from Japan “New”. Equipped with a “fast-acting system” that allows the holder to fall forward with the quick-acting lever, minimizing the elasticity of the rod, reducing guide entanglement and backlash. You can freely change the direction of the rod by swinging it 90 degrees left and right. Bolt-on type that attaches the base to the pedestal with bolts, making it easy to remove the main body. Bolt-on type exclusively for pleasure boats. We do not mark merchandise values below value or mark items as “gifts” – Japan, US and International government regulations prohibit such behavior. About Importer’s Obligation. Thank you for your understanding.

]]> https://fishingcaneholder.com/2024/10/daiwa-429757-fishing-rod-holder-power-holder-sokko-boat-from-japan-new/feed/ 0 https://fishingcaneholder.com/2024/01/daiichi-seiko-lark-16-dx-01013-reel-rod-holder-boat-fishing-made-in-japan/ https://fishingcaneholder.com/2024/01/daiichi-seiko-lark-16-dx-01013-reel-rod-holder-boat-fishing-made-in-japan/#comments Sat, 13 Jan 2024 17:35:39 +0000 https://fishingcaneholder.com/2024/01/daiichi-seiko-lark-16-dx-01013-reel-rod-holder-boat-fishing-made-in-japan/




DAIICHI SEIKO Lark 16 DX. Electric/manual reel rod holder for boat fishing. Storage size (when storing the accessory dry bag): 120x300x150mm. Compatible Harris (trunk thread): up to about No.

]]> https://fishingcaneholder.com/2024/01/daiichi-seiko-lark-16-dx-01013-reel-rod-holder-boat-fishing-made-in-japan/feed/ 0 https://fishingcaneholder.com/2023/09/daiichi-seiko-chibi-lark-types-rod-holder-for-boat-fishing-from-japan-fedex-new/ https://fishingcaneholder.com/2023/09/daiichi-seiko-chibi-lark-types-rod-holder-for-boat-fishing-from-japan-fedex-new/#comments Sun, 10 Sep 2023 16:24:00 +0000 https://fishingcaneholder.com/2023/09/daiichi-seiko-chibi-lark-types-rod-holder-for-boat-fishing-from-japan-fedex-new/





However, I will provide courteous and responsive service. If you are looking for a particular item that is not in my listing, please do not hesitate to contact me. I will look it for you. International Buyers – Please Note.

]]> https://fishingcaneholder.com/2023/09/daiichi-seiko-chibi-lark-types-rod-holder-for-boat-fishing-from-japan-fedex-new/feed/ 0 https://fishingcaneholder.com/2023/05/carmate-inno-fishing-rod-holder-j-hook-7-if14-car-vehicle-jimny-jb74-japan-made/ https://fishingcaneholder.com/2023/05/carmate-inno-fishing-rod-holder-j-hook-7-if14-car-vehicle-jimny-jb74-japan-made/#comments Thu, 04 May 2023 05:23:27 +0000 https://fishingcaneholder.com/2023/05/carmate-inno-fishing-rod-holder-j-hook-7-if14-car-vehicle-jimny-jb74-japan-made/












Fishing Rod Holder J-HOOK 7. Jimny JB74, 64 Sierra 2018-ON. However, some of our products are on back order and may take a few weeks. This product can be securely fastened to the vehicle body, and the simple J-shaped holders and elastic codes enable loading and unloading fishing rods easily. It can hold not only the fishing rods but also landing net handles and fishing gaffs. Remove the assist grips and mount this product securely. For Jimny JB74, install with the included spacers. The maximum weight load is 7kg. Easy installation by detachable brackets and fixing knobs. This product perfectly fits the ceiling of the vehicle by an easy adjustment of the mounting stays angle. Also, adjustment and setting are easy by facilitating attachment levers. Compatible with 22mm to 32mm diameters. This newly designed J-shaped holder accommodates smaller tip tops of 1 piece. Pads are included for rods with tip diameters no more than 5mm. Holds up to 7 fishing rods. However, please note the distance between each fishing rod is narrower when holding 7 fishing rods, and the fishing reels may hit. The corners of each part are rounded to enhance vehicle internal collision safety. The CARMATE Fishing Rod Holder DUAL 5 or DUAL 8, which can more securely fasten the fishing rods, are also available. They are safe even for off-road driving. This product is a general product and fits many vehicles, including Jimny JB74, but does not fit older Jimny models, including JB43, 33, and 23. Applicable vehicles: Jimny (2018-present) JB74, 64. Material: Aluminum frames, plastic holders. Mounting: Easy (with basic tools). CARMATE is Japan’s largest supplier of auto parts. Especially the interior and exterior accessories are of high quality and very popular in Japan. They manufacture not only vehicle parts but also baby supplies, home products, office products, and outdoor equipment as well. We are also closed for a few days in August and New Year’s Day. Some of our products are on back order and may take a few weeks. We can accept a return within 30 days after you receive it. Our company is a small online shop and doesn’t have a showroom. But our products are carefully selected and well-tested and mainly TANIGUCHI, Japan’s number one Jimny parts supplier. Our staff is Japanese and Canadian outdoor enthusiasts. All our products are authentic and of exceptional quality. Jimny has 2 categories in Japan; Kei-car and Sierra. Kei-car (JB64, 23, JA22, 12, 11, 71, SJ30) has a 660cc engine. And Sierra (JB74, 43, 33, 32, 31, JA51, SJ40) has a 1.3 or 1.5L engine, the same as the international models. Our products are designed for Sierra and some products work for the Kei-car as well. They are designed for RHD (Right Hand Drive) and JDM (Japan Domestic Market). We hope that most will fit international models and LHD (Left Hand Drive) but we have not tested their compatibility yet. Please ensure that the part you are purchasing is compatible with your vehicle prior to ordering. All products are designed by Japanese companies and most of them are made in Japan. We do not mark merchandise values below value or mark items as gifts. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “compass-auto-japan” and is located in this country: JP. This item can be shipped worldwide.

• Brand: CARMATE
• Type: Vehicle Mounted Holder
• Number of Rods: 7
• Material: Aluminum
• Features: Adjustable
• Country/Region of Manufacture: Japan
• UPC: 4973007448143

]]> https://fishingcaneholder.com/2023/05/carmate-inno-fishing-rod-holder-j-hook-7-if14-car-vehicle-jimny-jb74-japan-made/feed/ 0 https://fishingcaneholder.com/2023/03/carmate-inno-fishing-rod-holder-dual-8-if17-car-vehicle-jimny-jb74-japan-made/ https://fishingcaneholder.com/2023/03/carmate-inno-fishing-rod-holder-dual-8-if17-car-vehicle-jimny-jb74-japan-made/#comments Wed, 15 Mar 2023 23:37:07 +0000 https://fishingcaneholder.com/2023/03/carmate-inno-fishing-rod-holder-dual-8-if17-car-vehicle-jimny-jb74-japan-made/













Fishing Rod Holder DUAL 8. Jimny JB74, 64 Sierra 2018-ON. However, some of our products are on back order and may take a few weeks. This product can be securely fastened to the vehicle body, and fishing rods can be securely fastened to this product. This popular fishing rod holder is safe even for off-road driving. Both 1-piece and 2-piece rods can be securely fastened. Holds up to 8 fishing rods. Holder frames are 850mm. Remove the assist grips and mount this product securely. For Jimny JB74, install with the included spacers. The maximum weight load is 7kg. Easy installation by detachable brackets and fixing knobs. This product perfectly fits the ceiling of the vehicle by an easy adjustment of the mounting stays angle. Also, adjustment and setting are easy by facilitating attachment levers. The rear holders are compatible with grip diameters up to 34mm and tip diameters up to 16mm. The front holders are compatible with butt diameters up to 16mm and tip diameters up to 8mm. You can remove the hold easily. However, please note the distance between each fishing rod is narrower when holding 7 fishing rods, and the fishing reels may hit. The corners of each part are rounded to enhance vehicle internal collision safety. The CARMATE Fishing Rod Holder “DUAL 5″ which can hold up to 5-7 fishing rods with a 255mm narrower frame than this product is also available. The CARMATE Fishing Rod Holder “J-Hook 7″ which can hold not only the fishing rods but also landing net handle and fishing gaffs by simple J-shaped hooks and elastic codes are also available. This product is a general product and fits many vehicles, including Jimny JB74, but does not fit older Jimny models, including JB43, 33, and 23. Applicable vehicles: Jimny (2018-present) JB74, 64. Material: Aluminum frames, plastic holders. Size: H200×W1450×D1240mm (holder frames: 850mm). Mounting: Easy (with basic tools). CARMATE is Japan’s largest supplier of auto parts. Especially the interior and exterior accessories are of high quality and very popular in Japan. They manufacture not only vehicle parts but also baby supplies, home products, office products, and outdoor equipment as well. We are also closed for a few days in August and New Year’s Day. Some of our products are on back order and may take a few weeks. We can accept a return within 30 days after you receive it. Our company is a small online shop and doesn’t have a showroom. But our products are carefully selected and well-tested and mainly TANIGUCHI, Japan’s number one Jimny parts supplier. Our staff is Japanese and Canadian outdoor enthusiasts. All our products are authentic and of exceptional quality. Jimny has 2 categories in Japan; Kei-car and Sierra. Kei-car (JB64, 23, JA22, 12, 11, 71, SJ30) has a 660cc engine. And Sierra (JB74, 43, 33, 32, 31, JA51, SJ40) has a 1.3 or 1.5L engine, the same as the international models. Our products are designed for Sierra and some products work for the Kei-car as well. They are designed for RHD (Right Hand Drive) and JDM (Japan Domestic Market). We hope that most will fit international models and LHD (Left Hand Drive) but we have not tested their compatibility yet. Please ensure that the part you are purchasing is compatible with your vehicle prior to ordering. All products are designed by Japanese companies and most of them are made in Japan. We do not mark merchandise values below value or mark items as gifts. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “compass-auto-japan” and is located in this country: JP. This item can be shipped worldwide.

• Brand: CARMATE
• Type: Vehicle Mounted Holder
• Number of Rods: 8
• Material: Aluminum
• Features: Adjustable
• Country/Region of Manufacture: Japan
• UPC: 4973007448174

]]> https://fishingcaneholder.com/2023/03/carmate-inno-fishing-rod-holder-dual-8-if17-car-vehicle-jimny-jb74-japan-made/feed/ 0 https://fishingcaneholder.com/2023/01/daiwa-shakuri-lark-long-rod-holder-from-japan-fedex-excellent-free-shipping/ https://fishingcaneholder.com/2023/01/daiwa-shakuri-lark-long-rod-holder-from-japan-fedex-excellent-free-shipping/#comments Thu, 05 Jan 2023 12:13:47 +0000 https://fishingcaneholder.com/2023/01/daiwa-shakuri-lark-long-rod-holder-from-japan-fedex-excellent-free-shipping/




There are some scratches and dirt. The thing in the photograph is all. However, I will provide courteous and responsive service. If you are looking for a particular item that is not in my listing, please do not hesitate to contact me. I will look it for you. International Buyers – Please Note. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “daiyama_07″ and is located in this country: JP. This item can be shipped worldwide.

• Brand: Daiwa
• Type: NA
• Maximum Length: NA
• Number of Rods: NA
• Color: NA
• Material: NA
• MPN: NA
• Features: NA
• Country/Region of Manufacture: Japan
• Item Width: NA

]]> https://fishingcaneholder.com/2023/01/daiwa-shakuri-lark-long-rod-holder-from-japan-fedex-excellent-free-shipping/feed/ 0 https://fishingcaneholder.com/2022/11/daiichi-seiko-chibi-lark-long-type-s-rod-holder-fishing-from-japan-brand-new/ https://fishingcaneholder.com/2022/11/daiichi-seiko-chibi-lark-long-type-s-rod-holder-fishing-from-japan-brand-new/#comments Sun, 13 Nov 2022 21:40:59 +0000 https://fishingcaneholder.com/2022/11/daiichi-seiko-chibi-lark-long-type-s-rod-holder-fishing-from-japan-brand-new/



Daiichi Seiko CHIBI LARK Long Type S Rod Holder fishing From Japan? However, I will provide courteous and responsive service. If you are looking for a particular item that is not in my listing, please do not hesitate to contact me. I will look it for you. International Buyers – Please Note. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “daiyama_07″ and is located in this country: JP. This item can be shipped worldwide.

• Color: Black
• Material: NA
• MPN: NA
• Item Length: NA
• Brand: Daiichi Seiko
• Type: NA
• Maximum Length: NA
• Item Height: NA
• Number of Rods: NA
• Features: NA
• Country/Region of Manufacture: Japan
• Item Weight: 825g
• Item Width: NA

]]> https://fishingcaneholder.com/2022/11/daiichi-seiko-chibi-lark-long-type-s-rod-holder-fishing-from-japan-brand-new/feed/ 0 https://fishingcaneholder.com/2022/06/daiichiseiko-lark-900-01040-fishing-rod-holder-90-5-step-swing-made-in-japan/ https://fishingcaneholder.com/2022/06/daiichiseiko-lark-900-01040-fishing-rod-holder-90-5-step-swing-made-in-japan/#comments Wed, 29 Jun 2022 23:23:45 +0000 https://fishingcaneholder.com/2022/06/daiichiseiko-lark-900-01040-fishing-rod-holder-90-5-step-swing-made-in-japan/




[Features] -A rod holder dedicated to cruiser and motorboat fishing. A compact rod holder provided with two types of rod holding components: 1. A rod holding component with a support function that will free the rod with a just a single action to catch middle-sized fish using a compact electrical reel. A rod holding component for short-distant casting to catch small fish using a spinning reel and a compact bait reel. 90 degree & 5-steps swing for small and medium-sized fishing. [Product specifications] Brand: DAIICHISEIKO(Japan) Condition: Brand New Item Code: 01040 -Lark Rod Holder Size: 128 x 60 x 55mm(5.03 x 2.36 x 2.16in) / Chibi Support 70 x 70 x 50mm(2.75 x 2.75 x 1.96in) Weight: 340g -Replaceable Rod Holder Storage Size: 206 x 60 x 52mm(8.11 x 2.36 x 2.04in) Weight: 280g -Base Size: 59 x 57 x 20mm(2.32 x 2.24 x 0.78in) Accessories: Replacement Rod Holder, Adapter SS/S for Thin Rod Diameter, Drill (Diameter f5 mm), Tapping Screw (f6 x 20 mm) x 4, Rubber Packing, Base Made in Japan. We do not mark merchandise values below value or mark items as “gifts” – US and International government regulations prohibit such behavior. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “happy1lucky1″ and is located in this country: JP. This item can be shipped to North, South, or Latin America, all countries in continental Asia, Australia.

• Brand: DAIICHISEIKO(Japan)
• Type: Rod Holder
• MPN: 01040

]]> https://fishingcaneholder.com/2022/06/daiichiseiko-lark-900-01040-fishing-rod-holder-90-5-step-swing-made-in-japan/feed/ 0 https://fishingcaneholder.com/2021/04/daiwa-rod-holder-power-holder-sokko-160r-boat-fishing-excellent-used-japan-5/ https://fishingcaneholder.com/2021/04/daiwa-rod-holder-power-holder-sokko-160r-boat-fishing-excellent-used-japan-5/#comments Thu, 01 Apr 2021 08:42:49 +0000 http://fishingcaneholder.com/2021/04/daiwa-rod-holder-power-holder-sokko-160r-boat-fishing-excellent-used-japan-5/





Daiwa rod holder power holder Sokko 160R Boat Fishing Excellent Used Japan 5. It is a long-standing standard product. I kept it in the storeroom for a long time. I bought a new one and used it about 4 to 5 times, so there is a feeling of use such as scratches, dirt, and baldness of the paint. It is a used item to the last. Everything in the picture. Please refrain from purchasing if you are concerned about the details. The structure that the holder part falls forward with the haste lever. By minimizing the bending of the rod, it prevents thread entanglement and backlash in the guide, and enables high-speed gimmick fall. The haste system cannot be used with horizontal attachment. It is possible to swing 90 degrees to the left and right (5 steps each), and the direction of the rod can be changed freely. Can be switched between vertical and horizontal. Depending on the shape of the boat, it can be attached vertically and horizontally with one touch. International Buyers – Please Note. The item “Daiwa rod holder power holder Sokko 160R Boat Fishing Excellent Used Japan 5″ is in sale since Sunday, November 22, 2020. This item is in the category “Sporting Goods\Fishing\Reels”. The seller is “dk-jp-store” and is located in Seki-City, Japan. This item can be shipped worldwide.

• MPN: GX-160R
• Department: Unisex
• Fishing Type: Saltwater Fishing
• Number of Pieces: No
• Size: See photo
• Country/Region of Manufacture: Japan
• Material: Un known
• Brand: Daiwa
• Style: Rod holder
• Color: Black / Green

]]> https://fishingcaneholder.com/2021/04/daiwa-rod-holder-power-holder-sokko-160r-boat-fishing-excellent-used-japan-5/feed/ 0