https://fishingcaneholder.com Sun, 26 Apr 2026 04:04:39 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://fishingcaneholder.com/2026/04/dolphin-boat-t-top-twin-rod-holder-fishing-boat-center-console-t-top-rod-holder/ https://fishingcaneholder.com/2026/04/dolphin-boat-t-top-twin-rod-holder-fishing-boat-center-console-t-top-rod-holder/#comments Sun, 05 Apr 2026 15:23:39 +0000 https://fishingcaneholder.com/2026/04/dolphin-boat-t-top-twin-rod-holder-fishing-boat-center-console-t-top-rod-holder/




Dolphin T TOP Twin Rod Holder/Fishing Center Console T Top Rod Holder. The original dolphin twin rod holders were created to hold 2 rods and adjustable every 45 degrees. The twin rod holders will clamp to your T-Top, hardtop, tower, radar arch, rail or any structure made from 2 inch, 1.75inch pipe. You will have a place for you fishing rods in a safe place off your floor. The twin rod holders can be angled by rotating the clamp around your frame and also side to side with the adjustable clamp. There is a laser engraved logo along the tube so you know you are purchasing the genuine article from Dolphin. The smooth clear anodized finish to the twin tubes and clamps makes these rod holders so easy to keep clean. A quick wash, rinse and wipe down after a great days fishing is all it needs. No hard polishing to get these puppies looking great all the time. The clamp fitting is cnc machined from solid 6061 aircraft aluminium. The rod holder are cold-drawn tubing which is smooth polished and anodised for superior protection. All our hardware is 316 stainless steel bolts for secure holds, strength and durability in the harsh marine environment. We source and only use high Quality raw materials for pure performance to look after your gear. The clamp size is 2 inch, we supply a rubber insert for 1.5inch size tubing. The rubber insert will protect your Dolphin t top frame. The clamp will allow the rod holders to be adjusted at 18 degree intervals. Now you can angle the rods sideways to an angle that suits your needs.

]]> https://fishingcaneholder.com/2026/04/dolphin-boat-t-top-twin-rod-holder-fishing-boat-center-console-t-top-rod-holder/feed/ 0 https://fishingcaneholder.com/2026/03/dolphin-t-top-twin-rod-holder-fishing-center-console-t-top-rod-holder/ https://fishingcaneholder.com/2026/03/dolphin-t-top-twin-rod-holder-fishing-center-console-t-top-rod-holder/#comments Wed, 25 Mar 2026 15:00:41 +0000 https://fishingcaneholder.com/2026/03/dolphin-t-top-twin-rod-holder-fishing-center-console-t-top-rod-holder/




Dolphin T TOP Twin Rod Holder/Fishing Center Console T Top Rod Holder. The original dolphin twin rod holders were created to hold 2 rods and adjustable every 45 degrees. The twin rod holders will clamp to your T-Top, hardtop, tower, radar arch, rail or any structure made from 2 inch, 1.75inch pipe. You will have a place for you fishing rods in a safe place off your floor. The twin rod holders can be angled by rotating the clamp around your frame and also side to side with the adjustable clamp. There is a laser engraved logo along the tube so you know you are purchasing the genuine article from Dolphin. The smooth clear anodized finish to the twin tubes and clamps makes these rod holders so easy to keep clean. A quick wash, rinse and wipe down after a great days fishing is all it needs. No hard polishing to get these puppies looking great all the time. The clamp fitting is cnc machined from solid 6061 aircraft aluminium. The rod holder are cold-drawn tubing which is smooth polished and anodised for superior protection. All our hardware is 316 stainless steel bolts for secure holds, strength and durability in the harsh marine environment. We source and only use high Quality raw materials for pure performance to look after your gear. The clamp size is 2 inch, we supply a rubber insert for 1.5inch size tubing. The rubber insert will protect your Dolphin t top frame. The clamp will allow the rod holders to be adjusted at 18 degree intervals. Now you can angle the rods sideways to an angle that suits your needs.

]]> https://fishingcaneholder.com/2026/03/dolphin-t-top-twin-rod-holder-fishing-center-console-t-top-rod-holder/feed/ 0 https://fishingcaneholder.com/2026/03/brocraft-clamp-on-twin-fishing-rod-holder-aluminum-boat-t-top-rail-mount-2-rod/ https://fishingcaneholder.com/2026/03/brocraft-clamp-on-twin-fishing-rod-holder-aluminum-boat-t-top-rail-mount-2-rod/#comments Thu, 19 Mar 2026 02:35:51 +0000 https://fishingcaneholder.com/2026/03/brocraft-clamp-on-twin-fishing-rod-holder-aluminum-boat-t-top-rail-mount-2-rod/









Ideal for T-Top, rails, towers, and frames.

]]> https://fishingcaneholder.com/2026/03/brocraft-clamp-on-twin-fishing-rod-holder-aluminum-boat-t-top-rail-mount-2-rod/feed/ 0 https://fishingcaneholder.com/2024/12/casting-8g-spoon-effortlessly-sitting-down-24-shimano-twin-power-fe-c3000-taipei-taiwan-2024/ https://fishingcaneholder.com/2024/12/casting-8g-spoon-effortlessly-sitting-down-24-shimano-twin-power-fe-c3000-taipei-taiwan-2024/#comments Wed, 04 Dec 2024 00:50:32 +0000 https://fishingcaneholder.com/2024/12/casting-8g-spoon-effortlessly-sitting-down-24-shimano-twin-power-fe-c3000-taipei-taiwan-2024/ ]]> https://fishingcaneholder.com/2024/12/casting-8g-spoon-effortlessly-sitting-down-24-shimano-twin-power-fe-c3000-taipei-taiwan-2024/feed/ 0 https://fishingcaneholder.com/2024/03/anglers-fish-n-mate-twin-boat-outrigger-rod-holder-518-anodized-aluminum-new-2/ https://fishingcaneholder.com/2024/03/anglers-fish-n-mate-twin-boat-outrigger-rod-holder-518-anodized-aluminum-new-2/#comments Thu, 07 Mar 2024 11:14:04 +0000 https://fishingcaneholder.com/2024/03/anglers-fish-n-mate-twin-boat-outrigger-rod-holder-518-anodized-aluminum-new-2/






ANGLER’S FISH’N-MATE TWIN BOAT OUTRIGGER / ROD HOLDER #518 – NEW IN PACKAGE! GREAT OUTRIGGER / ROD HOLDER! PERFECT FOR YOUR BOAT! STRONG AND DURABLE CONSTRUCTION! TWO ROD HOLDER TUBES – 1 STRAIGHT, 1 ANGLED! SLOTS IN BOTTOM SMALL TUBE ALLOW 90-DEGREE ROTATION OF THE ROD HOLDER! Model – #518 – Twin Boat Outrigger / Rod Holder. Type – Rod Holder. Holds – 2 Rod. Small Bottom Tube Dimensions – 1.5″ diameter, 10.5″ length. Large Main Tubes (2) Dimensions – 1.9″ diameter, 10″ length. Boat Outrigger Rod Holder. Bright Anodized / Polished Aluminum Tube 6061-T6. (2) Replaceable Stainless Steel Clevis / Gimbal Pins. (2) Stainless Steel Clevis Pin Rings to Secure Rod / Reel Holders. Flared Top for Easy Use. (2) Slots provided in Small Tube for 90-Degree Rotation of the Rod Holder. Please ask if you have any questions!

]]> https://fishingcaneholder.com/2024/03/anglers-fish-n-mate-twin-boat-outrigger-rod-holder-518-anodized-aluminum-new-2/feed/ 0 https://fishingcaneholder.com/2023/08/anglers-fish-n-mate-twin-boat-outrigger-rod-holder-518-anodized-aluminum-new/ https://fishingcaneholder.com/2023/08/anglers-fish-n-mate-twin-boat-outrigger-rod-holder-518-anodized-aluminum-new/#comments Sun, 06 Aug 2023 00:34:52 +0000 https://fishingcaneholder.com/2023/08/anglers-fish-n-mate-twin-boat-outrigger-rod-holder-518-anodized-aluminum-new/






ANGLER’S FISH’N-MATE TWIN BOAT OUTRIGGER / ROD HOLDER #518 – NEW IN PACKAGE! GREAT OUTRIGGER / ROD HOLDER! PERFECT FOR YOUR BOAT! STRONG AND DURABLE CONSTRUCTION! TWO ROD HOLDER TUBES – 1 STRAIGHT, 1 ANGLED! SLOTS IN BOTTOM SMALL TUBE ALLOW 90-DEGREE ROTATION OF THE ROD HOLDER! Model – #518 – Twin Boat Outrigger / Rod Holder. Type – Rod Holder. Holds – 2 Rod. Small Bottom Tube Dimensions – 1.5″ diameter, 10.5″ length. Large Main Tubes (2) Dimensions – 1.9″ diameter, 10″ length. Boat Outrigger Rod Holder. Bright Anodized / Polished Aluminum Tube 6061-T6. (2) Replaceable Stainless Steel Clevis / Gimbal Pins. (2) Stainless Steel Clevis Pin Rings to Secure Rod / Reel Holders. Flared Top for Easy Use. (2) Slots provided in Small Tube for 90-Degree Rotation of the Rod Holder. Please ask if you have any questions!

]]> https://fishingcaneholder.com/2023/08/anglers-fish-n-mate-twin-boat-outrigger-rod-holder-518-anodized-aluminum-new/feed/ 0 https://fishingcaneholder.com/2023/01/how-to-install-rod-holders-installing-gemlux-rod-holders-on-a-twin-vee-catamaran/ https://fishingcaneholder.com/2023/01/how-to-install-rod-holders-installing-gemlux-rod-holders-on-a-twin-vee-catamaran/#comments Fri, 27 Jan 2023 16:18:05 +0000 https://fishingcaneholder.com/2023/01/how-to-install-rod-holders-installing-gemlux-rod-holders-on-a-twin-vee-catamaran/ ]]> https://fishingcaneholder.com/2023/01/how-to-install-rod-holders-installing-gemlux-rod-holders-on-a-twin-vee-catamaran/feed/ 0 https://fishingcaneholder.com/2022/02/twin-fixed-dispy-rod-holder-tree-with-cup-holder-aluminum-fishing-rod-holders-2/ https://fishingcaneholder.com/2022/02/twin-fixed-dispy-rod-holder-tree-with-cup-holder-aluminum-fishing-rod-holders-2/#comments Sat, 26 Feb 2022 17:20:12 +0000 https://fishingcaneholder.com/2022/02/twin-fixed-dispy-rod-holder-tree-with-cup-holder-aluminum-fishing-rod-holders-2/













Welcome to High Seas Gear Products! Receive discounted prices on all products when you shop on our website! Rods/Tracks/Net in photos are not included. If you are a returning customer and are looking for our new products we would like to take a moment and thank you for your business and support. If you are new to High Seas Gear then we would like to welcome you and encourage you to give our products a try. You will not be disappointed! We are a Minnesota based company and take pride in the price and quality of all the products we produce. Our product line keeps growing to meet customers wants and needs. So Thank You and Happy Fishing! Twin Fixed Dipsy Rod Holder Tree with attached Cup Holder. Top works as a net holder or extra rod holder. Mounting base is included. Base size is 3″ x 5″ x 1/4 thick. Base fits 3 wide tracks or can be directly bolted. Made of 6061-T6 Aluminum tubing with 1/8 walls. Adjustable base, easy as loosen knob, adjust to desired position and tighten knob. Protective vinyl end caps for extra protection against normal wear on your rod and reels. Unit is 23″ tall with 12″ long holders. Comes complete with cup holder 4″ Diameter 4″ height. High seas gear offers a full line of quality products. Check out my other items. Be sure to add me to your favorites list. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “anttila5242″ and is located in this country: US. This item can be shipped to United States, Canada.

• Country/Region of Manufacture: United States
• Material: Aluminum
• Type: Boat Mounted Holder
• Model: CUPFD2
• Features: Removable
• Number of Rods: 2
• Brand: High Seas Gear
• UPC: 694263120362

]]> https://fishingcaneholder.com/2022/02/twin-fixed-dispy-rod-holder-tree-with-cup-holder-aluminum-fishing-rod-holders-2/feed/ 0 https://fishingcaneholder.com/2022/02/rod-holder-tree-twin-fixed-with-cup-holder-new-aluminum-fishing-rod-holders-2/ https://fishingcaneholder.com/2022/02/rod-holder-tree-twin-fixed-with-cup-holder-new-aluminum-fishing-rod-holders-2/#comments Sun, 06 Feb 2022 13:52:55 +0000 https://fishingcaneholder.com/2022/02/rod-holder-tree-twin-fixed-with-cup-holder-new-aluminum-fishing-rod-holders-2/













Welcome to High Seas Gear Products! Receive discounted prices on all products when you shop on our website! If you are a returning customer and are looking for our new products we would like to take a moment and thank you for your business and support. If you are new to High Seas Gear then we would like to welcome you and encourage you to give our products a try. You will not be disappointed! We are a Minnesota based company and take pride in the price and quality of all the products we produce. Our product line keeps growing to meet customers wants and needs. So Thank You and Happy Fishing! Rod Holder Tree Twin Fixed with attached Cup Holder. Top works as a net holder or extra rod holder. Mounting base is 3″ x 5″ x 1/4 thick. Base fit 3 wide tracks or can be directly bolted. Made of 6061-T6 Aluminum tubing with 1/8 walls. Adjustable base, easy as loosen knob, adjust to desired position and tighten knob. Protective vinyl end caps for extra protection against normal wear on your rod and reels. Unit is 23″ tall with 12″ long holders. Comes complete with cup holder 4″ Diameter 4″ height. High seas gear offers a full line of quality products. Check out my other items. Be sure to add me to your favorites list. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “anttila5242″ and is located in this country: US. This item can be shipped to United States, Canada.

• Country/Region of Manufacture: United States
• Material: Aluminum
• Type: Boat Mounted Holder
• Model: CUPFIX2
• Features: Removable
• Number of Rods: 2
• Brand: High Seas Gear
• UPC: 694263120010

]]> https://fishingcaneholder.com/2022/02/rod-holder-tree-twin-fixed-with-cup-holder-new-aluminum-fishing-rod-holders-2/feed/ 0 https://fishingcaneholder.com/2022/02/twin-dipsy-fixed-aluminum-rod-holder-tree-high-seas-gear-fishing-rod-holders-2/ https://fishingcaneholder.com/2022/02/twin-dipsy-fixed-aluminum-rod-holder-tree-high-seas-gear-fishing-rod-holders-2/#comments Sat, 05 Feb 2022 01:49:55 +0000 https://fishingcaneholder.com/2022/02/twin-dipsy-fixed-aluminum-rod-holder-tree-high-seas-gear-fishing-rod-holders-2/













Welcome to High Seas Gear Products! Receive discounted prices on all producs when you shop on our website! Rods and tracks in photos are not included. If you are a returning customer and are looking for our new products we would like to take a moment and thank you for your business and support. If you are new to High Seas Gear then we would like to welcome you and encourage you to give our products a try. You will not be disappointed! We are a Minnesota based company and take pride in the price and quality of all the products we produce. Our product line keeps growing to meet customers wants and needs. So Thank You and Happy Fishing! Twin Fixed Dipsy Rod Holder Tree. Top works as a net holder or extra rod holder. Bottom holder is designed to fit a dipsy rod set at a 80 degree angle. Mounting base is included. Base size is 3″ x 5″ x 1/4 thick. Base fits 3 tracks or can be directly bolted. Made of 6061-T6 Aluminum tubing with 1/8 walls. Adjustable base, easy as loosen knob, adjust to desired position and tighten knob. Protective vinyl end caps for extra protection against normal wear on your rod and reels. Unit is 23″ tall with 12″ long holders. High seas gear offers a full line of quality products. Check out my other items. Be sure to add me to your favorites list. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “anttila5242″ and is located in this country: US. This item can be shipped to United States, Canada.

• Country/Region of Manufacture: United States
• Material: Aluminum
• Type: Boat Mounted Holder
• Model: FIXDIP2
• Features: Outrigger Rod Holder, Saltwater, Removable
• Number of Rods: 2+
• Brand: High Seas Gear
• UPC: 684191856914

]]> https://fishingcaneholder.com/2022/02/twin-dipsy-fixed-aluminum-rod-holder-tree-high-seas-gear-fishing-rod-holders-2/feed/ 0