Archives for : April 2022

Protective End Caps for Fishing rod holders Rod Trees 2 tube OPW (100-QTY)

April 10, 2022 admin

Protective End Caps for Fishing rod holders Rod Trees 2 tube OPW (100-QTY)

These are protective sleeves for the ends of rod holders or rod trees that use a 2″ diameter tube and has a 1/8″ wall thickness. They are 2″ tall, a full 1/4″ longer than our competitors! The longer they are the better they stay put! They are made out of heavy duty vinyl. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “mr_rpm6900″ and is located in this country: US. This item can be shipped worldwide.

Non-Domestic Product: No
Brand: Unbranded
Type: Protective End Caps
Custom Bundle: No
Model: PEC
Country/Region of Manufacture: United States
Modified Item: No

protective

Stainless Steel(6 pack) Boat Marine Fishing Side Mount Rod Holder -257mm US ESA

April 10, 2022 admin

Stainless Steel(6 pack) Boat Marine Fishing Side Mount Rod Holder -257mm US ESA

2PCS 3In Line Marine Boat 12V Electric Bilge Air Blower Fan 130CFM Ventilation. 2Pack Boat Plumbing Electric Bilge Pump 12V 1500GPH for Boat Marine Yacht US. 2Pack 12V 270 CFM 4 in-Line Marine White Electric Bilge Air Blower Fan for Boat. 2PCS Baseball Softball Batting Cage Net Heavy Duty Backstop Practice Net-10x20ft. Aluminum Alloy Fishing 24 Stand Portable Storage Tool Rack White Rod Holder Pole. 2Pack Boat Marine 316 Stainless Pull up Cleat Flush Mount 6-1/2 Amarine-made. 750GPH Boat Marine Shower Sump Pump Drain Kit System 12V Multi-Port Inlet. Boeng Unique 5-Cup Coffee Syphon Tabletop Siphon Coffee Maker Amarine Made ESA. 12V 12GPM Macerator Waste Water Pump Lift UP to 9.8 Feet Boat RV Marine 45LPM US. 10 Pack Boat Aluminum Drop-in Drink Cup Holder for Table, RV, Camper. White 4 in-Line Marine Boat Electric Bilge Air Blower Fan 12V 270 CFM Quiet. 2 Pack Boat Dock Line 1/2 Inch 15FT Double Braid Nylon Mooring Rope. 4Pack Retractable Golf Cart Seat Belts Kit for EZGO, Yamaha, Club Car, Go Kart. 2Packs Boat Deck Hatch Access Hatch & Lid 17-1/4×12-3/8 Marine Access Hatch. Non-Slip Traction Pad Deck Grip Boat Mat EVA Sheet for Kayak Deck 40 x 20in. 4 Pack 1/2 Inch 20 FT Double Braid Nylon Dock Line Marine Boat Mooring Tow Rope. 2-Inch Shackle Tow Hitch Receiver Fits Jeep Wrangler and All Chevy/GMC. Built-in Pressure Switch Marine 12V Automatic Self-priming Diaphragm Water Pump. 12V, 100W, 160PSI Electric Washer Pump Kit Portable High Pressure Water Pump ESA. 30 Pack Rock Climbing Holds with Installation Hardware for Kids Climbing Grips. 12V 2000gph Boat Bilge Water Pump Built-In Float Switch Automatic Submersible. 180 LED Night Fishing Boat Submersible Deep Drop Underwater Light Lamp-12V. Baseball Softball Batting Cage Net Heavy Duty Backstop Practice Net- 10x20ft US. Stainless Steel(6 pack) Boat Marine Fishing Side Mount Rod Holder -257mm US ESA. High quality, stainless steel side mount marine rod holders with stainless side mount brackets. Mirror finished 100% Stainless steel construction, for sleek appearance and to suit today’s modern watercraft. Rubber insert to protect your fishing rod from any wear against the stainless surface. Can be mounted vertically or at any desired angle, onto a flat vertical surface. Easy to install, using 4 x 6mm diam. Pan head mounting screws (screws not included). Stainless stopper pin built into the base of the rod holder to located the rod butt into position Open base to allow any captured water to drain out. Ideal for fishing boats where gunwale space may be limited. Marine grade 316 stainless steel side. Mount rod holders with brackets. Tube length 257mm (10-1/8). Stainless stopper pin built into the base. Mounting screws not included. The easiest and most secure way to pay on line. And you should expect to receive it one to five days after dispatch. Please make sure that the product you return is not damaged and pack the product in the inner original packaging bag. If the product can meet your needs, please fill in the feedback so that others can feel your happy experience. Good feedback can encourage us to continuously improve product quality! This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “bestmarinestore-1″ and is located in this country: US. This item can be shipped to United States.

Brand: Amarine Made
Number of Rods: 6
MPN: YI-0199-02
Material: Stainless Steel
Features: Flush Mount
Color: Silver
Item Length: 257mm (10-1/8\
Country/Region of Manufacture: China
Department: Sport
Quantity: 6
Tube length: 257mm (10-1/8\
Inside diameter: 40mm

stainless

Awesome Diy Fishing Rod Holder For Bank Fishing Cheap Too

April 9, 2022 admin

awesome

Lee’s Clamp-On Rod Holder Horizontal Mount Fits 1.050 O. D. Pipe RA5201GL

April 9, 2022 admin

Lee's Clamp-On Rod Holder Horizontal Mount Fits 1.050 O. D. Pipe RA5201GL

Lee’s Clamp-On Rod Holder – Gold Aluminum – Horizontal Mount – Fits 1.050 O. Please read item description for full details. Aluminum Clamp-on Rod Holders Model: RA5201GL Color: Gold Fits: 1.050 O. Pipe Mount: Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don’t like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. We are adventurists sharing the outdoors with everyone. We offer a wide variety of outdoor camping and hunting gear. If you don’t see what you’re looking for, send us a message. We pride ourselves on honesty and work hard to get what you need at the best price possible. Please join us on Twitter, Instagram, Pinterest or Facebook to follow our adventures. See you on the trail and enjoy your outdoors! Images are stock photos and may not represent newer updated models. Manufacturing defects vary by individual Brands. We will give instructions as what is to be done on a case by case basis. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “bubnugget” and is located in this country: US. This item can be shipped to United States.

MPN: RA5201GL
Brand: Lee’s
Number of Rods: 1
Type: Clamp-On Rod Holder
Features: Horizontal Mount
Material: Aluminum
Custom Bundle: no
Modified Item: no
UPC: 96811520127

lee's

Ce Smith Aluminum Vertical Clampon Rod Holder 1.66 Od 53725

April 8, 2022 admin

Ce Smith Aluminum Vertical Clampon Rod Holder 1.66 Od 53725

Camping & Outdoor Gear. Military & Law Enforcement. In Business for over 15 years. Save 30-80% Off Retail. We Transfer The Savings To You! Ce Smith Aluminum Vertical Clampon Rod Holder 1.66 Od 53725. Aluminum Clamp-On Rod Holder – Vertical – 1.66 OD. Smith’s line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style. These rod holders feature a super strong 3/8″ thick blade, rugged welded 1/3″ tall gimbal bar, and a 1-5/8 inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected. These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want. We deliver to PO Boxes and military addresses via U. Our packages are fully insured. We may utilize signature required. Please check your local laws, rules and regulations in regards to possible restrictions imposed on goods imported. Doing that is against U. Select the reason for the return. Make sure you connect to Night Galaxy, Inc. Either by signing up for our newsletters or by keeping in touch on one of our social media profiles and never miss out on a deal again! GET THE LATEST SPECIALS & DISCOUNT COUPONS DELIVERED TO YOUR INBOX. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “nightgalaxy” and is located in this country: US. This item can be shipped worldwide.

Brand: C.E. Smith
UPC: 768296009748
MPN: 53725

smith

C. E. Smith Aluminum Clamp-On Rod Holder Horizontal 1.315 OD 53710

April 8, 2022 admin

C. E. Smith Aluminum Clamp-On Rod Holder Horizontal 1.315 OD 53710

Aluminum Clamp-On Rod Holder – Horizontal – 1.315 OD. Smith’s line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style. These rod holders feature a super strong 3/8″ thick blade, rugged welded 1/3″ tall gimbal bar, and a 1-5/8 inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner and the addition of a rod security hole in the blade ensures that your valuable rods are protected. These aluminum clamp-on rod holders are precision machined to create an exacting slip resistant fit on marine aluminum boat rails and tower, and they prevent the risk of welding heat damage to any cables inside. With 5 available sizes in both vertical and horizontal clamps, complete with 316 stainless screws, these clamp-on rod holders are ideal for easily adding as many rod holders as you want. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings. Ca. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “marinehq” and is located in this country: US. This item can be shipped to United States.

Brand: C.E. Smith
MPN: 53710
UPC: 768296009717
Type: C.E. Smith Aluminum Clamp-On Rod Holder – Horizontal – 1.315\
Model: 53710

smith

Fishing Pole Holder, Wall Mount Rod Rack, Mahogany, 18 Wide 8 Rod Capacity, Fis

April 7, 2022 admin

Fishing Pole Holder, Wall Mount Rod Rack, Mahogany, 18 Wide 8 Rod Capacity, Fis

Solid Mahogany Wood Fishing Rod Rack, Keyhole Wall Mount Fishin Pole Holder Vertical Rod Rack Notches are 2″ apart Solid mahogany wood construction Semi-gloss polyurethane finish Great compact way to display and keep ready all of your fishing rods Bottom piece dimensions 18″ Wide x 6 3/8″ Tall x 3 7/16″ Deep with 1 1/2″ Diameter Notches for Rods Top piece dimensions 18″ Wide x 3″ Tall x 2 1/16″ Deep Mounts to the wall with keyholes located in the back of both ends of both pieces Installs easily and includes all necessary mounting hardware Keep in mind that the holes in these racks are only two inches apart. This is by design. It allows for maximum versatility, and maximum use of available space. It can be like a puzzle fitting fully rigged rods and reels in all of the spaces. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “royal-handicrafts” and is located in this country: IN. This item can be shipped worldwide.

Material: Wood
Type: Wall Mount Rod Rack
Number of Rods: 8
Brand: Handmade

fishing

Lee’s Clamp-On Rod Holder Black Aluminum Horizontal Mount Fits 1.315 O

April 7, 2022 admin

Computers, Tablets & Networking. Cell Phones & Accessories. Lee’s Clamp-On Rod Holder – Black Aluminum – Horizontal Mount – Fits 1.315 O. Authorized Dealer for most of our brands. Country of Origin: United States. Brief Description: LEE’S CLAMP-ON ROD HOLDER BK ALUM HORIZONTAL PIPE SIZE #2. If video is not playing, means there is no video available. Clamp-On Rod Holder – Black Aluminum – Horizontal Mount – Fits 1.315 O. Pipe Color:Black Pipe Size:#2 Fits:1.315 O. Pipe Mount:Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don’t like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. We answer within 0-8 hours. You can reach our team by clicking on the Ask a question. Link at the bottom of the page. We can send most of our products worldwide. Please track your package to avoid the return to us. In case it will, we’ll credit you less our S&H costs. If you require a specific carrier, please note it when you checkout at the end of your order. We will do our best to keep our customers happy. Please remember We’re Always On Your Side. We’re working very hard to maintain our business reputation and we enjoy providing a world-class service. Verify your address is correct & in English. Follow the tracking once available. Leave us a 5 star feedback. LEARN OF NEW OFFERS. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “dotphins” and is located in this country: US. This item can be shipped worldwide.

UPC: 096811520233
MPN: RA5202BK
Model: RA5202BK
Part Type: Hunting & Fishing | Rod Holders
Type: Hunting & Fishing | Rod Holders
Line Type: Hunting & Fishing | Rod Holders
Department: Hunting & Fishing | Rod Holders
Bait Type: Hunting & Fishing | Rod Holders
Brand: Hunting & Fishing | Rod Holders
Manufacturer Part Number: RA5202BK

lee's

Used Boat Fishing Rod Holder 5 Tube 2 Clamp on 1”-1-1/4” Stainless Steel Inse

April 6, 2022 admin

Used Boat Fishing Rod Holder 5 Tube 2 Clamp on 1''-1-1/4'' Stainless Steel Inse

Used Boat Fishing Rod Holder 5 Tube 2 Clamp on 1”-1-1/4” Stainless Steel Inse. 5 Rod Boat Fishing Rod Holder 2 Clamp on 1”-1-1/4” Rail Mount Stainless Steel Fishing Rod Holders for Boat Rail Rod Holders. The plastic knob of the item is broken, which does not affect the use of the overall item function. The clamp size is 2 inch, we supply 2 rubber inserts for 1″ to 1-1/4″ inch size tubing. Stainless Steel;Adjustable Fishing Rod Holder for Rails 1″ to 1-1/4″. The 5 rod holders will clamp to your T-Top, hardtop, tower, radar arch, rail or any structure made from 2 inch tube pipe (without insert), 1.5inch-1.75inch pipe (with insert). You will have a place for you fishing rods in a safe place off your floor;Stainless Steel Clamp On Adjustable Fishing Rod Holder for Rails 1″ to 1 1/4″. It Can Adjust to Any Angle. The 5 rod holders were created to hold 5 rods. Length of All :32-1/4. You will have a place for you fishing rods in a safe place off your floor. The smooth clear finish to the 5 tubes and clamps makes these rod holders so easy to keep clean. A quick wash, rinse and wipe down after a great days fishing is all it needs. No hard polishing to get these puppies looking great all the time. The clamp fitting is cnc machined from Stainless 316. All our hardware is 316 stainless steel bolts for secure holds, strength and durability in the harsh marine environment. We source and only use high Quality raw materials for pure performance to look after your gear. The clamp size is 2 inch, we supply 2 rubber inserts for 1″ to 1-1/4″inch size tubing. The rubber insert will protect your Dolphin t top frame. The clamp will allow the rod holders to be adjusted at 18 degree intervals. Now you can angle any of the 5 rods sideways to an angle that suits your needs. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Due to time zones, our reply to your questions may not be immediately. If it’s non-workdays, please kindly be patient and wait till Monday. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “proffitrader999″ and is located in this country: US. This item can be shipped to United States.

Brand: Unbranded
Material: Stainless Steel
clamp size: 2 inch
Length of All: 32-1/4\
Number of Rods: 5
Features: Adjustable
Type: Rod Holder
Color: Silver
Warranty: 2 year

used

4 Rod Holder System Fishing Rod Holders For Boats Steel Marine Rod Holder Rest

April 6, 2022 admin

4 Rod Holder System Fishing Rod Holders For Boats Steel Marine Rod Holder Rest

4 Rod Holder System Fishing Rod Holders For Boats Steel Marine Rod Holder Rest. Holds up to 4 rods per unit while slow trolling for crappie. Ring loops tilt lock, allows you to spread your rigs for trolling or pulling. Full adjustability for 4 outer rod angle, Features Mirror finish 304 stainless steel. T-Bar Solid construction Fits into standard rod holder. Both horizontally and vertically adjustable, Fits into any standard gunnel mount, Rod holder offers anglers the flexibility and ease to maneuver their rod in any direction. International buyers please note. When you select our company products you get the satisfaction of knowing you are dealing factory direct. Our factory has been manufacturing Marine Hardware and equipment for more than 10 years. Professionally made products by our skilled craftsmen. We have a simple business goal of delivering a great range of products, at the best possible price. We understand our success will only come from our customer’s satisfaction. Our customers trust us and our high quality products, we appreciate this trust and are committed to delivering, we ensure speedy dispatch with full tracking and will contact you directly if something is somehow delayed. At our company we have great product knowledge and have access to our own engineers and multinational team of experts who are always ready to assist you our valued customer. Our company have thousands of happy customers to date and we are sure you to will enjoy your shopping experience. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “globalsourses” and is located in this country: CN. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: Unbranded
Features 1: Both horizontally and vertically adjustable
Features 2: Holds up to 4 rods per unit while slow trolling for crappie
Material: Stainless Steel
Packing: 1Set
Type: Rod Pod

holder

<< older entries

newer entries >>

Fishing Rod Holder