Posts for Tag : lee’s

Lee’S Tackle Rh577V 0? Stainless Steel Swivel Base Flush Mount Rod Holder 2.25

Lee-S-Tackle-Rh577V-0-Stainless-Steel-Swivel-Base-Flush-Mount-Rod-Holder-2-25-01-mdjk
Lee'S Tackle Rh577V 0? Stainless Steel Swivel Base Flush Mount Rod Holder 2.25

Lee'S Tackle Rh577V 0? Stainless Steel Swivel Base Flush Mount Rod Holder 2.25
Lee’S Tackle Rh577V 0? Stainless Steel Swivel Base Flush Mount Rod Holder 2.25. Swivel Base Rod Holder RH577V Vertical 0° Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “ceshowroom” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Colombia, Costa Rica, Dominican Republic, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay, China, Hong Kong, Mexico, Saudi Arabia, Chile, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica.
  • Brand: Lee’s Tackle
  • MPN: RH577V
  • Manufacturer Part Number: RH577V
  • Type: Boat/Outrigger Mounted Holder
  • Model: RH577V
  • Compatible Brand: Lee’s Tackle
  • Features: Flush Mount
  • Number of Rods: 1
  • Model Number: RH577V
  • Country/Region of Manufacture: United States
  • Warranty: 1 Year
  • UPC: 096811517707
  • EAN: 0096811517707

Lee'S Tackle Rh577V 0? Stainless Steel Swivel Base Flush Mount Rod Holder 2.25

(3) lee’s clamp on aluminum rodholders size #2

3-lee-s-clamp-on-aluminum-rodholders-size-2-01-af
(3) lee's clamp on aluminum rodholders size #2
(3) lee's clamp on aluminum rodholders size #2
(3) lee's clamp on aluminum rodholders size #2

(3) lee's clamp on aluminum rodholders size #2
(3) lee’s clamp on aluminum rodholders size #2. They have marks around the tops and one has marks on the side from getting wet/damp inside the plastic covers while in storage. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “jibrrom1″ and is located in this country: US. This item can be shipped to United States.
  • Material: Aluminum
  • Brand: Lee’s Tackle

(3) lee's clamp on aluminum rodholders size #2

Lee’s Clamp-On Rod Holder Gold Aluminum Vertical Mount Fits 2.375 O. D. Pipe

Lee-s-Clamp-On-Rod-Holder-Gold-Aluminum-Vertical-Mount-Fits-2-375-O-D-Pipe-01-bege
Lee's Clamp-On Rod Holder Gold Aluminum Vertical Mount Fits 2.375 O. D. Pipe
Lee's Clamp-On Rod Holder Gold Aluminum Vertical Mount Fits 2.375 O. D. Pipe
Lee's Clamp-On Rod Holder Gold Aluminum Vertical Mount Fits 2.375 O. D. Pipe

Lee's Clamp-On Rod Holder Gold Aluminum Vertical Mount Fits 2.375 O. D. Pipe
Lee’s Clamp-On Rod Holder Gold Aluminum Vertical Mount Fits 2.375 O. Aluminum Clamp-on Rod Holders Model: RA5005GL Color: Gold Fits: 2.375 O. Pipe Mount: Vertial JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don’t like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Thank you for choosing Lee’s Tackle Products as your preferred line of salt water sport fishing equipment. Is a fourth generation, family owned and operated business that began in 1920 when Edward J. Lee opened a retail fishing store in Miami, Florida. In the mid 1930s, motivated by his love of fishing and his passion for innovation, Roswell E. Began manufacturing big game fishing reels, rod holders and fighting chairs. His innovative designs revolutionized the sport fishing industry. He was the first to use aluminum tubing in the fabrication of outriggers. He also designed and patented the fishing rod Roller Top. Today, most of his designs are still in production. Over the years, Lee’s has continued to introduce exciting new products to the world of salt water sport fishing. Our product line has expanded to include over 46 distinct rod holder models, 8 styles of outrigger holders, outrigger poles from 11 to 46 feet in length, as well as, many other miscellaneous sport fishing products. Lee’s Tackle leads the sport fishing industry with innovative ideas and precision engineering. Our designs continue to be the most copied throughout the industry. For over 90 years, we have had an established reputation for building the highest quality precision equipment using the finest marine materials. From its humble beginning in 1920, Lee’s Tackle has evolved into a multi-million dollar international company with worldwide sales. Our success and reputation are the result of our creative ideas, precision engineering, high quality materials and outstanding workmanship. Today, two generations of Lees proudly carry on this tradition of excellence. The Lee’s Tackle family consists of highly skilled, hard working craftsmen and artisans who pride themselves on producing the highest quality products. Constantly challenging ourselves to improve processes and produce better products, we are dedicated to continuing our leadership role in today’s marine industry. Inspired by your confidence in us, and your loyalty to our product lines, we continually strive to bring you exciting new products that go beyond your expectations. You’re already purchasing the item. With our dynamic pricing model, our prices are always competitive. Our prices are some of the lowest that you will find on the internet. Rest assured that you’re getting a good deal when purchasing with us. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “gregjcfive” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Lee’s Tackle
  • Features: Clamp On
  • MPN: RA5005GL
  • Material: Aluminum
  • Number of Rods: 1
  • Type: Vertical Rod Holder
  • Style: COMPUTER
  • UPC: 096811500525

Lee's Clamp-On Rod Holder Gold Aluminum Vertical Mount Fits 2.375 O. D. Pipe

Lee’s Clamp-On Rod Holder Gold Aluminum Horizontal Mount Fits 1.050 O. D. Pipe

Lee-s-Clamp-On-Rod-Holder-Gold-Aluminum-Horizontal-Mount-Fits-1-050-O-D-Pipe-01-tqpc
Lee's Clamp-On Rod Holder Gold Aluminum Horizontal Mount Fits 1.050 O. D. Pipe
Lee's Clamp-On Rod Holder Gold Aluminum Horizontal Mount Fits 1.050 O. D. Pipe
Lee's Clamp-On Rod Holder Gold Aluminum Horizontal Mount Fits 1.050 O. D. Pipe

Lee's Clamp-On Rod Holder Gold Aluminum Horizontal Mount Fits 1.050 O. D. Pipe
Lee’s Clamp-On Rod Holder Gold Aluminum Horizontal Mount Fits 1.050 O. Aluminum Clamp-on Rod Holders Model: RA5201GL Color: Gold Fits: 1.050 O. Pipe Mount: Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don’t like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. Thank you for choosing Lee’s Tackle Products as your preferred line of salt water sport fishing equipment. Is a fourth generation, family owned and operated business that began in 1920 when Edward J. Lee opened a retail fishing store in Miami, Florida. In the mid 1930s, motivated by his love of fishing and his passion for innovation, Roswell E. Began manufacturing big game fishing reels, rod holders and fighting chairs. His innovative designs revolutionized the sport fishing industry. He was the first to use aluminum tubing in the fabrication of outriggers. He also designed and patented the fishing rod Roller Top. Today, most of his designs are still in production. Over the years, Lee’s has continued to introduce exciting new products to the world of salt water sport fishing. Our product line has expanded to include over 46 distinct rod holder models, 8 styles of outrigger holders, outrigger poles from 11 to 46 feet in length, as well as, many other miscellaneous sport fishing products. Lee’s Tackle leads the sport fishing industry with innovative ideas and precision engineering. Our designs continue to be the most copied throughout the industry. For over 90 years, we have had an established reputation for building the highest quality precision equipment using the finest marine materials. From its humble beginning in 1920, Lee’s Tackle has evolved into a multi-million dollar international company with worldwide sales. Our success and reputation are the result of our creative ideas, precision engineering, high quality materials and outstanding workmanship. Today, two generations of Lees proudly carry on this tradition of excellence. The Lee’s Tackle family consists of highly skilled, hard working craftsmen and artisans who pride themselves on producing the highest quality products. Constantly challenging ourselves to improve processes and produce better products, we are dedicated to continuing our leadership role in today’s marine industry. Inspired by your confidence in us, and your loyalty to our product lines, we continually strive to bring you exciting new products that go beyond your expectations. You’re already purchasing the item. With our dynamic pricing model, our prices are always competitive. Our prices are some of the lowest that you will find on the internet. Rest assured that you’re getting a good deal when purchasing with us. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “gregjcfive” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, Guernsey, Gibraltar, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Vietnam, Uruguay.
  • Brand: Lee’s Tackle
  • Color: Gold
  • Features: clamp On
  • MPN: RA5201GL
  • Material: Aluminum
  • Number of Rods: 1
  • Type: Horizontal Clamp On
  • Style: FISHING_ROD_HOLDER
  • UPC: 096811520127

Lee's Clamp-On Rod Holder Gold Aluminum Horizontal Mount Fits 1.050 O. D. Pipe

Lee’s 30 Degree Ss Flush Mount Swivel Rod Holder Extra Long

Lee-s-30-Degree-Ss-Flush-Mount-Swivel-Rod-Holder-Extra-Long-01-npa
Lee's 30 Degree Ss Flush Mount Swivel Rod Holder Extra Long

Lee's 30 Degree Ss Flush Mount Swivel Rod Holder Extra Long
Swivel Base Rod Holders RH575XL Standard Angle 30° Stainless Steel Flush Mount w/ Swivel Base Extra Long This holder is 4 longer than the standard length allowing the bent butt to sit deeper in the holder thus reducing the leverage and stress on the mounting surface. Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “tugandtow” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Brand: Lee’s Tackle
  • MPN: RH575XL
  • Model: RH575XL
  • UPC: 096811517516
  • GTIN: 00096811517516
  • Type: Lee’s 30° Stainless Steel Swivel Base Flush Mount Rod Holder
  • Angle: 30 Degrees
  • Construction: Stainless Steel
  • Diameter (Inches): 2-1/4\
  • Finish: Polished
  • Length (Inches): 16\
  • Mounting Style: Flush

Lee's 30 Degree Ss Flush Mount Swivel Rod Holder Extra Long

Lee’s Clamp-On Rod Holder White Aluminum Horizontal Mount Fits 1.900 O

Lee-s-Clamp-On-Rod-Holder-White-Aluminum-Horizontal-Mount-Fits-1-900-O-01-ksv
Lee's Clamp-On Rod Holder White Aluminum Horizontal Mount Fits 1.900 O

Lee's Clamp-On Rod Holder White Aluminum Horizontal Mount Fits 1.900 O
Computers, Tablets & Networking. Cell Phones & Accessories. Lee’s Clamp-On Rod Holder – White Aluminum – Horizontal Mount – Fits 1.900 O. Authorized Dealer for most of our brands. Brief Description: LEE’S CLAMP-ON ROD HOLDER WHT ALUM HORIZONTAL PIPE SIZE #4. If video is not playing, means there is no video available. Clamp-On Rod Holder – White Aluminum – Horizontal Mount – Fits 1.900 O. Fits: 1.900 O. JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don’t like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. We answer within 0-8 hours. You can reach our team by clicking on the Ask a question. Link at the bottom of the page. We can send most of our products worldwide. Please track your package to avoid the return to us. In case it will, we’ll credit you less our S&H costs. If you require a specific carrier, please note it when you checkout at the end of your order. We will do our best to keep our customers happy. Please remember We’re Always On Your Side. We’re working very hard to maintain our business reputation and we enjoy providing a world-class service. Verify your address is correct & in English. Follow the tracking once available. Leave us a 5 star feedback. LEARN OF NEW OFFERS. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “dotphins” and is located in this country: US. This item can be shipped worldwide.
  • UPC: 096811520578
  • MPN: RA5204WH
  • Brand: Lee’s Tackle
  • Part Type: Hunting & Fishing | Rod Holders
  • Type: Hunting & Fishing | Rod Holders
  • Line Type: Hunting & Fishing | Rod Holders
  • Department: Hunting & Fishing | Rod Holders
  • Bait Type: Hunting & Fishing | Rod Holders
  • Manufacturer Part Number: RA5204WH
  • Manufacture Warranty: Yes
  • Model: RA5204WH

Lee's Clamp-On Rod Holder White Aluminum Horizontal Mount Fits 1.900 O

Lee’s King Fish Rod Holder KF5000WH UPC 096811500617

Lee-s-King-Fish-Rod-Holder-KF5000WH-UPC-096811500617-01-nap
Lee's King Fish Rod Holder KF5000WH UPC 096811500617

Lee's King Fish Rod Holder KF5000WH UPC 096811500617
Computers, Tablets & Networking. Cell Phones & Accessories. Lee’s King Fish Rod Holder. Authorized Dealer for most of our brands. Brief Description: LEE’S KING FISH ROD HOLDER. If video is not playing, means there is no video available. King Fish Rod Holder. Bolt-on king fish rod holder. Designed to mount under the hardtops, for King Fish. They are also great for Stripper Bass and running Mojos. Powder-coated white to match most hardtops. Mount with four 1/4 bolts, hardware not included. Please measure your hardtop before ordering. We answer within 0-8 hours. You can reach our team by clicking on the Ask a question. Link at the bottom of the page. We can send most of our products worldwide. Please track your package to avoid the return to us. In case it will, we’ll credit you less our S&H costs. If you require a specific carrier, please note it when you checkout at the end of your order. We will do our best to keep our customers happy. Please remember We’re Always On Your Side. We’re working very hard to maintain our business reputation and we enjoy providing a world-class service. Verify your address is correct & in English. Follow the tracking once available. Leave us a 5 star feedback. LEARN OF NEW OFFERS. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “dotphins” and is located in this country: US.
  • UPC: 096811500617
  • MPN: KF5000WH
  • Brand: Lee’s Tackle
  • Part Type: Hunting & Fishing | Rod Holders
  • Type: Hunting & Fishing | Rod Holders
  • Line Type: Hunting & Fishing | Rod Holders
  • Department: Hunting & Fishing | Rod Holders
  • Bait Type: Hunting & Fishing | Rod Holders
  • Manufacturer Part Number: KF5000WH
  • Manufacture Warranty: Yes
  • Model: KF5000WH

Lee's King Fish Rod Holder KF5000WH UPC 096811500617

Lee’s Clamp-On Rod Holder Horizontal Mount Fits 1.050 O. D. Pipe RA5201GL

Lee-s-Clamp-On-Rod-Holder-Horizontal-Mount-Fits-1-050-O-D-Pipe-RA5201GL-01-ez
Lee's Clamp-On Rod Holder Horizontal Mount Fits 1.050 O. D. Pipe RA5201GL

Lee's Clamp-On Rod Holder Horizontal Mount Fits 1.050 O. D. Pipe RA5201GL
Lee’s Clamp-On Rod Holder – Gold Aluminum – Horizontal Mount – Fits 1.050 O. Please read item description for full details. Aluminum Clamp-on Rod Holders Model: RA5201GL Color: Gold Fits: 1.050 O. Pipe Mount: Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don’t like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. We are adventurists sharing the outdoors with everyone. We offer a wide variety of outdoor camping and hunting gear. If you don’t see what you’re looking for, send us a message. We pride ourselves on honesty and work hard to get what you need at the best price possible. Please join us on Twitter, Instagram, Pinterest or Facebook to follow our adventures. See you on the trail and enjoy your outdoors! Images are stock photos and may not represent newer updated models. Manufacturing defects vary by individual Brands. We will give instructions as what is to be done on a case by case basis. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “bubnugget” and is located in this country: US. This item can be shipped to United States.
  • MPN: RA5201GL
  • Brand: Lee’s
  • Number of Rods: 1
  • Type: Clamp-On Rod Holder
  • Features: Horizontal Mount
  • Material: Aluminum
  • Custom Bundle: no
  • Modified Item: no
  • UPC: 96811520127

Lee's Clamp-On Rod Holder Horizontal Mount Fits 1.050 O. D. Pipe RA5201GL

Lee’s Clamp-On Rod Holder Black Aluminum Horizontal Mount Fits 1.315 O

Lee-s-Clamp-On-Rod-Holder-Black-Aluminum-Horizontal-Mount-Fits-1-315-O-01-cey
Lee's Clamp-On Rod Holder Black Aluminum Horizontal Mount Fits 1.315 O

Lee's Clamp-On Rod Holder Black Aluminum Horizontal Mount Fits 1.315 O
Computers, Tablets & Networking. Cell Phones & Accessories. Lee’s Clamp-On Rod Holder – Black Aluminum – Horizontal Mount – Fits 1.315 O. Authorized Dealer for most of our brands. Country of Origin: United States. Brief Description: LEE’S CLAMP-ON ROD HOLDER BK ALUM HORIZONTAL PIPE SIZE #2. If video is not playing, means there is no video available. Clamp-On Rod Holder – Black Aluminum – Horizontal Mount – Fits 1.315 O. Pipe Color:Black Pipe Size:#2 Fits:1.315 O. Pipe Mount:Horizontal JUST CLAMP THEM ON! Aluminum rod holders that are as beautiful as they are functional. With no hassle or wear and tear on your boat you can install these rod holders with only an Allen Wrench. No lengthy trips to the tower builder for custom installation at custom prices. Simply place the two halves of the clamp around the pipe, insert the bolts and tighten. Install them wherever you like. If later, you don’t like the position, simply move them. These Rod Holders are the perfect solution for boats with wiring or hydraulic lines inside their tower legs. Now you can install Rod Holders on your Tower, Hard Top, T-Top, Radar Arch, Rails, Poling Platform or any structure made from standard size aluminum pipe. All Holders come lined with a heavy duty white vinyl insert. The Clamping portion of the Rod Holder is precision made for an exact fit. Four Marine Grade Stainless Bolts assure an even clamping pressure and a secure bond. The clamp is welded to the tube with either a fin or an oval rod for maximum strength. The completed Rod Holder is then meticulously polished to a mirror finish. These holders are designed primarily for storage but may be used for light tackle trolling. We answer within 0-8 hours. You can reach our team by clicking on the Ask a question. Link at the bottom of the page. We can send most of our products worldwide. Please track your package to avoid the return to us. In case it will, we’ll credit you less our S&H costs. If you require a specific carrier, please note it when you checkout at the end of your order. We will do our best to keep our customers happy. Please remember We’re Always On Your Side. We’re working very hard to maintain our business reputation and we enjoy providing a world-class service. Verify your address is correct & in English. Follow the tracking once available. Leave us a 5 star feedback. LEARN OF NEW OFFERS. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “dotphins” and is located in this country: US. This item can be shipped worldwide.
  • UPC: 096811520233
  • MPN: RA5202BK
  • Model: RA5202BK
  • Part Type: Hunting & Fishing | Rod Holders
  • Type: Hunting & Fishing | Rod Holders
  • Line Type: Hunting & Fishing | Rod Holders
  • Department: Hunting & Fishing | Rod Holders
  • Bait Type: Hunting & Fishing | Rod Holders
  • Brand: Hunting & Fishing | Rod Holders
  • Manufacturer Part Number: RA5202BK

Lee's Clamp-On Rod Holder Black Aluminum Horizontal Mount Fits 1.315 O

Lee’s Clamp-On Rod Holder Gold Aluminum Horizontal Mount Fits 1.315 OD

Lee-s-Clamp-On-Rod-Holder-Gold-Aluminum-Horizontal-Mount-Fits-1-315-OD-01-qnrr
Lee's Clamp-On Rod Holder Gold Aluminum Horizontal Mount Fits 1.315 OD
Lee's Clamp-On Rod Holder Gold Aluminum Horizontal Mount Fits 1.315 OD
Lee's Clamp-On Rod Holder Gold Aluminum Horizontal Mount Fits 1.315 OD
Lee's Clamp-On Rod Holder Gold Aluminum Horizontal Mount Fits 1.315 OD

Lee's Clamp-On Rod Holder Gold Aluminum Horizontal Mount Fits 1.315 OD
New in the package! This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “aarons_bargains_buys” and is located in this country: US. This item can be shipped to United States.
  • Brand: Lee’s
  • Type: Boat/Outrigger Mounted Holder
  • Custom Bundle: No
  • Number of Rods: 1
  • Features: Removable
  • MPN: RA5202GL
  • Material: Aluminum
  • Modified Item: No
  • UPC: 096811520233

Lee's Clamp-On Rod Holder Gold Aluminum Horizontal Mount Fits 1.315 OD