Posts for Tag : long

Vintage Old Polished Bronze/brass Cockpit Fishing Rod Holder 9 Long

October 24, 2021 admin

Vintage Old Polished Bronze/brass Cockpit Fishing Rod Holder 9 Long

THIS LISTING IS FOR A VINTAGE POLISHED BRONZE/BRASS? THIS WOULD LOOK AMAZING IN THE COCKPIT OF YOUR VINTAGE SPORTFISHER, THESE ARE HARD TO FIND, ESPECIALLY IN THIS CONDITION. AT THE TIME THIS WAS LISTED, I HAVE A SIMILAR ONE LISTED IN A SEPARATE LISTING, THE LAST PHOTOS SHOW BOTH, BUT THIS LISTING IS ONLY FOR THE SINGLE ROD HOLDER SHOWN IN THE REST OF THE PHOTOS. THEY ARE NOT IDENTICAL BUT CLOSE ENOUGH THAT ON OPPOSITE SIDES OF THE COCKPIT IT WOULDN’T BE NOTICED. THIS MEASURES APROX 9″ LONG, THE FLARED BRASS TUBE MEASURES 2″ DIAMETER AT THE NON-FLARED END. IT PROTRUDES FROM THE MOUNTING SURFACE APROX 3. The item “VINTAGE OLD POLISHED BRONZE/BRASS COCKPIT FISHING ROD HOLDER 9 LONG” is in sale since Monday, October 4, 2021. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Deck & Cabin Hardware”. The seller is “rags4jc” and is located in Morro Bay, California. This item can be shipped to North, South, or Latin America, all countries in Europe, Australia.

Manufacturer Part Number: ROD HOLDER
Brand: BRONZE

vintage

Penn Fathom Master 820 Electric Downrigger swivel mount Long boom rod holder USA

May 25, 2019 admin

Penn Fathom Master 820 Electric Downrigger swivel mount Long boom rod holder USA

Please make payments within three days. Works great has normal ware has wire. Has side rod holder 48 boom and one way swivel base. Has scuff marks to surfaces. Please look at the pictures for the condition. The item “Penn Fathom Master 820 Electric Downrigger swivel mount Long boom rod holder USA” is in sale since Thursday, May 9, 2019. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Downrigger, Outrigger Gear”. The seller is “mompopbean” and is located in Boca Raton, Florida. This item can be shipped to United States.

Brand: Penn
Model: 820 electric
Type: Downrigger
Country/Region of Manufacture: United States
MPN: Does Not Apply

penn

Driftmaster T-5300 Corner Rack Rod Holder, Long Line Trolling System

May 3, 2019 admin

Driftmaster T-5300 Corner Rack Rod Holder, Long Line Trolling System

LONG LINE TROLLING SYSTEM. Driftmaster has developed a trolling system that puts rods where you need them without limiting access to your engine or deck hatches. The T-5300 Corner Rack System consist of two stainless steel tubes, one for each rear corner of the boat. The tubes are bent to allow rods to be placed out the side, and the back. With rods aimed to the side as well as straight back, a trolling path of 30 or more feet can be covered with each pass. The system attaches to stainless base plates that mount flush to eliminate any tripping hazards when the racks are removed. The rack is Driftmaster strong and easily comes off the boat when not in use. Only the four flush mounting plates remain. The standard rack is ten inches tall and holds the rods sixteen inches off the deck. Each rack comes with four Lil Duo rod holders that can hold a rod at 0 or 30 degrees. Pro Series Duos are available for heavy rods and bigger fish. The two position rod holders allow you to raise or lower your rod tip quickly as you troll over shallows or tree tops. The port side rack comes with left threaded rod holders to allow hard pulls like planer boards or umbrella rigs while keeping your rods aimed out the side. The starboard side rack has right threaded rod holders for the same reason. The T-5300 comes complete with two racks, eight rod holders, and mounting hardware. The item “DRIFTMASTER T-5300 CORNER RACK ROD HOLDER, LONG LINE TROLLING SYSTEM” is in sale since Wednesday, April 17, 2019. This item is in the category “Sporting Goods\Fishing\Other Fishing”. The seller is “grizzlyjig” and is located in Caruthersville, Missouri. This item can be shipped to United States.

Model: T-5300
MPN: Does not apply
Brand: DRIFTMASTER

driftmaster

Big Jon Electric Downrigger, long shaft with butterfly plate and rod holders

April 23, 2019 admin

Big Jon Electric Downrigger, long shaft with butterfly plate and rod holders

Big jon electric downrigger long shaft with butterfly plate and rod holders. 1 swivel base is included. Not 2 in picture. The item “Big Jon Electric Downrigger, long shaft with butterfly plate and rod holders” is in sale since Saturday, April 20, 2019. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Downrigger, Outrigger Gear”. The seller is “rperkowski@yahoo.com” and is located in Henryville, Pennsylvania. This item can be shipped to United States.

Brand: Big Jon Sports
Type: Downrigger

electric

Lee’s 15° SSteel Swivel Bse Rod Holder- Extra Long Tube 2.25 OD X 14.5 Tube

January 7, 2019 admin

Fishing -Tackle Box/ Accessory. Marine Audio / Accessories. Satellite TV/ RADAR/SAT Phones. Trailer / RV Accessories. Trolling Motors & Accessories. Lee’s 15° SSteel Swivel Bse Rod Holder- Extra Long Tube 2.25″ OD X 14.5″ Tube. Swivel Base Rod Holders RH579XL Half Angle 15° Extra Long Tube Stainless Steel Flush Mount w/ Swivel Base Without a doubt, our swivel base rod holder is the Ultimate Rod Holder for the serious sportsman. Primarily designed to be used with bent butt tackle, the rod holders unique swivel base allows the rod butt to rotate in the rod holder when side pressure is applied to the tip of the rod. This is an indispensable tool, especially important in Giant Blue Fin Tuna fishing, where reel drags in the neighborhood of 60 pounds are frequently used and can result in tremendous forces being applied to the rod holder pin. Not only does this make sheared rod holder pins a thing of the past but, more importantly, it allows the tip of the rod to follow the fish. This reduces the possibility of line fraying and enhanced drag as the line streams sideways out of the roller tip instead of over the roller. The rod is also more easily removed from the holder since it is not locked on a rigid pin. The swivel base holder functions as a standard rod holder when used with straight butt rods. Straight butt rods can be manually rotated so that the line remains on the tips roller. The amount of torque required to rotate the swivel is set by adjusting the pressure on two nylon drag washers with a 1/2 inch stainless steel lock nut at the bottom of the rod holder. We are a licensed dealer for all the brands we sell and have over 8000 products in our warehouse. We work very hard to make you happy and will do our very best to resolve any issue. We are a proud member of the Better Business Bureau and take pride in what we do and how we treat our customers. We appreciate your business and thank you for shopping at BBG Marine Electronics. The item “Lee’s 15° SSteel Swivel Bse Rod Holder- Extra Long Tube 2.25 OD X 14.5 Tube” is in sale since Wednesday, November 30, 2016. This item is in the category “Sporting Goods\Fishing\Fishing Equipment\Rod Rests & Holders”. The seller is “bbg_marine” and is located in Bayville, New Jersey. This item can be shipped to United States.

Brand: Lees
MPN: RH579XL

lee's

5 Pole Fishing Rod Holder Rack Boat Storage Arch 63 Long White

August 27, 2018 admin

4 Pole Fishing Rod Holder Arch Rack – White. Very Good preowned condition – see pictures for the best details. The item “5 Pole Fishing Rod Holder Rack Boat Storage Arch 63 Long White” is in sale since Monday, January 15, 2018. This item is in the category “eBay Motors\Parts & Accessories\Boat Parts\Deck & Cabin Hardware”. The seller is “bobojerry14″ and is located in Florida. This item can be shipped worldwide.

Manufacturer Part Number: n/a
Brand: n/a

pole

newer entries >>

Fishing Rod Holder